Cornwall · England
Bath chip & crack repair in Parkfield, Cornwall
Problem with your bath in Parkfield? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Chips along the edge of the bath
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Getting a price
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Parkfield, and we will come back with a fixed quote.
Read more
Bath repair in Parkfield without replacing anything
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Our technicians work on pressed steel enamel, cast iron enamel and whirlpool & spa baths, and people most often call us about damage beneath the taps and a chipped rim or side.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Parkfield (PL14)
- Region
- Cornwall
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Parkfield
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
If you can see any of these, send us a picture:
- Impact holes in acrylic
- Rust spots around the plughole
- Deep scratches in acrylic
- A chipped rim or side
Comparing quotes
- What preparation is included
- Who will actually do the work
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Why book with us
- We come to you, anywhere in the UK
- Everything repaired in place
- A fixed quote before booking
- CHAS and Constructionline accredited
See our prices page and guide to resurfacing and replacement costs.
Work for landlords and builders
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
What a repair can’t fix
Before you book, it’s worth knowing the limits too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Parkfield
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Other services in Parkfield
Aftercare tips
Once the work has cured, treat it gently:
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Parkfield questions
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Parkfield and the surrounding area
Parkfield is about 4 miles north-east of Addington, in Cornwall. From the centre of Parkfield to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Parkfield is one of 644 places in Cornwall we cover.
All of PL14 is covered. We also cover the places around Parkfield: St Ive Cross (1 mile south), St Ive (1 mile west), Quethiock (2 miles south), Pensilva (2 miles north-west) and Merrymeet (2 miles west). Further out, we also cover Stonehouse (12 miles south-east), Bodmin (15 miles west), Saltash (8 miles south-east), Liskeard (4 miles south-west), Launceston (11 miles north) and Addington (4 miles south-west).
Local landmarks in Parkfield
In Parkfield, that means homes near Church of St Ivo and Butchers Arms. The closest station to Parkfield is Menheniot station, about 4.1 miles south of the centre. Nearby you’ll also find Kithill Castle (4.4 miles north-east). Green spaces nearby include Caradon Hill.
About our accreditations · Every repair comes with a one-year guarantee.
