Powys · Wales
Bath chip & crack repair in Pennal, Powys
Bath repair for Pennal, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Chips on the rim or sides
Covering Pennal
Pennal is about 26 miles west of Y Drenewydd, in Powys. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Pennal is one of 234 towns and villages in Powys where we work. You can also see our page for Liverpool, about 70 miles away.
All of SY20 is covered, from the main roads to the quietest streets. Jobs here include addresses on Felindre and Maes Teg. We also travel to Machynlleth (3 miles east), Pont Felin-y-ffrîdd (3 miles east), Felin-Gerrig (4 miles east), Abergynolwyn (4 miles north-west) and Penegoes (5 miles east).
Landmarks near Pennal
Our clients here include homes close to St Peter ad Vincula and Riverside Hotel, among other places. The closest station to Pennal is Dovey Junction station, roughly 1.7 miles south of the centre. Further afield, we also cover the area around Centre for Alternative Technology (4 miles north-east) and Machynlleth Community Hospital (3.1 miles east). Open spaces near Pennal include Penmaendovey and Ynys-hir RSPB reserve.
About our bath repair in Pennal
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We are often asked to fix an old repair that has yellowed or come loose and snagging damage from a refit, across cast iron enamel, roll-top & freestanding and acrylic.
Whatever the size of the job, it’s backed by a one-year guarantee in Pennal and across Powys.
- Where
- Pennal (SY20)
- County
- Powys
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Towns and villages near Pennal
Other services in Pennal
Do you need bath repair in Pennal?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
Keep an eye out for any of the following:
- Rusty patches near the plughole
- Snagging damage from a refit
- A kit repair that didn’t last
- Holes from dropped items
Questions to ask before booking
- If travel is included in the price
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- When it can be used again
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
What bath repair costs
Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- What kind of damage it is
- How many items we do on one visit
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Any earlier repairs or coatings
Email us pictures of the damage and one of the entire item, with your SY20 postcode, and we’ll reply with a fixed price.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, depending on the damage, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Getting a price
To get a price, send two or three pictures using our quote form or call us. We’ll say immediately if a repair is the right fix.
Related advice
Repair or replace in Pennal?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Why choose Surface Doctor in Pennal
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
Read our full price list and guide to resurfacing and replacement costs.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Pennal questions
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair a hole in a bath?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you quote from pictures?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
