East Sussex · England
Bath Repair in Pevensey
Bath repair in Pevensey without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- A chipped rim or side
- Hairline or through cracks in acrylic
About Pevensey
Pevensey is about 3 miles north-east of Eastbourne, in East Sussex. We visit clients in Pevensey and the surrounding area, so you do not need to take anything anywhere. Our technicians cover 289 places across East Sussex, from the larger towns to small villages. We work right across the region, from Pevensey to London (about 51 miles away).
Our visits in BN24 are booked in the same way as anywhere else. Streets in the area include High Street, Church Lane and Bridge End, all of which we cover. If you are just outside Pevensey, we cover Pevensey Bay (1 mile south-east), Westham (1 mile west), Jenkins' Green (1 mile west), Langney (2 miles south-west) and Normans' Bay (2 miles east). We also work in nearby towns such as Eastbourne (3 miles south-west), Hastings (10 miles east), Bexhill-on-Sea (6 miles east), Seaford (10 miles west), Lewes (15 miles west) and Hailsham (5 miles north-west).
What’s near Pevensey
Around Pevensey, we work in homes near The Smugglers' Inn, Pevensey and Westham CofE Primary School and St. Nicolas Church, among other places. There’s a railway station in Pevensey itself: Pevensey Bay station. Other landmarks nearby include Pevensey Court House Museum And Gaol (within half a mile west) and Pevensey Castle (within half a mile west). Open spaces near Pevensey include Gillham Wood and Combe Hill.
Bath repair in Pevensey, done in place
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Our repair technicians work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are rusty patches near the plughole and chips under the taps.
Every repair is covered by our one-year guarantee, wherever you are in East Sussex.
- Location
- Pevensey (BN24)
- Region
- East Sussex
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Once the work has cured, treat it gently:
- Fix dripping taps early to stop staining and limescale
- Stick to mild cleaners and a soft cloth
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Why repair rather than replace?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Free fixed quotes from pictures
- Generally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
Take a look at our prices page and bath cost comparison.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It generally takes a few hours, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Clear the area around the damage
How to get a price
To get a price, send two or three pictures using our quote form or ring us. We will say immediately if a repair is the right fix.
Read more
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Pevensey questions
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we’ll plan for it.
Places near Pevensey
Other services in Pevensey
Landlord and trade work in Pevensey
Housing associations and facilities teams use us for planned and reactive repairs in East Sussex and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Signs you need bath repair in Pevensey
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Most people get in touch after spotting something like this:
- A cracked acrylic bath
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
- Scratches you can feel with a fingernail
Comparing quotes
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- How the room is protected while they work
- Whether the colour is mixed to match
What bath repair costs
Prices start from £95. There’s no charge for travel to Pevensey. The price depends on:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How easy the damage is to reach
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
- Where you are, by postcode
- Details of any past repairs
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
