Devon · England
Bath chip & crack repair in Pinn, Devon
Damaged bath in Pinn? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Deep scratches in acrylic
Repair or replace in Pinn?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Free fixed quotes from pictures
- A year’s guarantee on all work
- CHAS and Constructionline accredited
- Nothing taken out or refitted
See our prices page and bath cost comparison.
Bath repair at your home in Pinn
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. Our technicians work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are a kit repair that didn’t last and a chip where the taps sit.
You get a one-year guarantee, the same in Pinn as everywhere else we work.
- Where
- Pinn (EX10)
- Region
- Devon
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Pinn
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
- Rinse it down after each bath
- Do not leave a fresh chip for long
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Also in Pinn
Covering Pinn
Pinn is about 2 miles south-west of Sidmouth, in Devon. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Pinn is one of 586 places in Devon we cover.
Here we cover the EX10 postcode area. Neighbouring places we cover include Otterton (2 miles south-west), Bulverton (2 miles north-east), Colaton Raleigh (2 miles west), Sidmouth (2 miles north-east) and Stowford (2 miles north-east). Within a short drive, we also cover Exeter (11 miles west), Exmouth (6 miles south-west), Teignmouth (13 miles south-west), Honiton (9 miles north), Dawlish (11 miles south-west) and St Thomas (12 miles west).
Landmarks near Pinn
In Pinn, that means homes near Sidmouth College. Well-known places in the area include Sidmouth Hospital (1.5 miles east) and Sidmouth Toy & Model Museum (1.5 miles east). Green spaces nearby include Aylesbeare Common RSPB reserve and Peak Hill.
Do you need bath repair in Pinn?
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Send us a photo if you notice any of these:
- Deep scratches in acrylic
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
Questions to ask before you book
- Whether there are any call-out or travel charges
- How the colour is matched
- Who will actually do the work
- How to look after the finish
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Pinn: your questions answered
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Are there extra charges for Pinn?
Travel is included in the price, and we charge the same wherever you are.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Let us know about parking or access
- Let us know if it has been repaired before
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
