County Durham · England
Bath Repair in Plawsworth
We travel to Plawsworth for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips under the taps
- Deep scratches in acrylic
Bath repair at your home in Plawsworth
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We regularly repair roll-top & freestanding, pressed steel enamel and cast iron enamel, and the jobs we see most are chips along the edge of the bath and a failed DIY repair that’s discoloured or lifting.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Plawsworth (DH2)
- Region
- County Durham
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a few hours, depending on the damage in most cases. We leave the room clean and you’ll know when it can be used.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the following day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Looking after it afterwards
So the finish stays in good condition:
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
- Make sure an acrylic bath is firm underfoot
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Covering Plawsworth
Plawsworth is about 2 miles south of Chester-le-Street, in County Durham. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 329 towns and villages across County Durham. You can also see our page for Newcastle upon Tyne, about 11 miles away.
Our visits in DH2 work the same way as everywhere else we cover. If you’re just outside Plawsworth, we cover Tan Hills (1 mile south-west), Kimblesworth (1 mile south-west), Chester Moor (1 mile north), Pity Me (2 miles south) and Chester-le-Street (2 miles north). Larger places within reach include Durham (3 miles south), Consett (10 miles west), Newton Aycliffe (14 miles south), Bishop Auckland (13 miles south), Spennymoor (9 miles south) and Seaham (10 miles east).
What’s near Plawsworth
Typical jobs here are in homes near Nettlesworth Primary School, Fyndoune Community College and St Philip and St James and the streets around them. The nearest railway station is Chester-Le-Street station, about 2.1 miles north. Nearby you will also find Chester Le Street Hospital (1.9 miles north) and The Gates Shopping Centre (3.4 miles south).
- Local facilities include Chester-le-Street (2.5 miles north)
Plawsworth questions
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you repair something that’s been repaired before?
Generally, yes. We remove the old repair before doing a new one.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work in Plawsworth?
We do. Technicians travel to Plawsworth from across the region, and the price is the same as everywhere else.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Places near Plawsworth
What else we do in Plawsworth
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Plawsworth as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Signs you need bath repair in Plawsworth
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- Rust spots around the plughole
- Snagging damage from a refit
Before booking anyone
- What preparation is included
- Whether there are any call-out or travel charges
- Who will actually do the work
- How the room is protected while they work
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
What affects the price in Plawsworth
Prices start from £95. Prices are worked out job by job. The main factors are:
- Where the damage is and how we get to it
- The size and number of damaged areas
- How many items we do on one visit
- The material and finish
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Quotes from your pictures
Good photos mean an accurate price. Here’s what helps:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- The material, if you know it
- One sharp close-up of the damage
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
