Ceredigion · Wales
Bath Repair in Pontrhydfendigaid
Bath repair for Pontrhydfendigaid, without a refit. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Cracks in an acrylic bath
- Chips on the rim or sides
Bath repair in Pontrhydfendigaid, done in place
Most of our bath repairs take a few hours, and you can normally bathe again the day after. There’s no need to book a plumber or tiler, because the bath doesn’t move. We regularly repair whirlpool & spa baths, acrylic and pressed steel enamel, and the jobs we see most are an old repair that has yellowed or come loose and a chip where the taps sit.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Where
- Pontrhydfendigaid (SY25)
- County
- Ceredigion
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Pontrhydfendigaid
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Usually one visit, start to finish
- Technicians who travel to you, UK-wide
- No extra charge for your area
- One-year guarantee on every repair
See our prices page and bath cost comparison.
What affects the price in Pontrhydfendigaid
Prices start from £95. Prices are worked out job by job, from your pictures. The main factors are:
- What the surface is made of
- The type of damage
- How many items we do on one visit
- The size and number of damaged areas
Our prices are the same across the UK, with no extra for Pontrhydfendigaid. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
Two or three clear photos are generally enough. It helps if you send:
- What it’s made of, if you know
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
- Do not leave razors or cans standing in the bath
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
FAQs for Pontrhydfendigaid
What does bath repair cost?
Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your SY25 postcode.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Can you repair a hole in a bath?
Typically. Send us a picture of the hole and one from under the bath if you can.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Pontrhydfendigaid.
Are there extra charges for Pontrhydfendigaid?
We do not add a call-out fee. Your fixed quote includes everything.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a few hours. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Keep a parking space free if you can
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Honest limits
We will not take on work that won’t last, so these are the limits:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Nearby places to Pontrhydfendigaid
What else we do in Pontrhydfendigaid
About Pontrhydfendigaid
Pontrhydfendigaid is about 28 miles south-west of Y Drenewydd, in Ceredigion. Across the SY25 area, we carry out the work at your property. We cover 125 places in Ceredigion.
Postcode districts we cover here: SY25. Local streets include Teifi Street, Mill Street and Bridge Street, and we cover them all. Other places close to Pontrhydfendigaid include Ystrad Fflur (1 mile south-east), Ysbyty Ystwyth (3 miles north), Tregaron (5 miles south-west), Lledrod (6 miles north-west) and Ceredigion (7 miles north-west). Larger places within reach include Aberystwyth (13 miles north-west), Trefechan (13 miles north-west), Lampeter (15 miles south-west), Penparcau (12 miles north-west), Caeffynnon (12 miles north-west) and Llanbadarn Fawr (12 miles north-west).
Around Pontrhydfendigaid
Our customers here include homes close to Red Lion pub and St David's Church, among other places. Further afield, we also cover the area around Castell Cwm Meurig Isaf (1.1 miles north-west). Open spaces near Pontrhydfendigaid include Erwllan Shop and Cors Ian.
About our accreditations · Every repair comes with a one-year guarantee.
