Herefordshire · England
Bath chip & crack repair in Pontshill Marsh, Herefordshire
Fixed-price bath repair in Pontshill Marsh and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Rust by the waste and overflow
Bath repair in Pontshill Marsh, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, usually in a single visit. Common call-outs are for snagging damage from a refit and a hole punched through by something heavy, on cast iron enamel, acrylic and pressed steel enamel.
Big or small, it’s backed by a one-year guarantee.
- Location
- Pontshill Marsh (HR9)
- County
- Herefordshire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Pontshill Marsh
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
What happens after I send photos?
We come back with a fixed price, usually with dates to choose from. You are under no obligation.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do you need bath repair in Pontshill Marsh?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
People typically call us after spotting something like this:
- A failed DIY repair that is discoloured or lifting
- Damage beneath the taps
- Chips on the rim or sides
- Impact holes in acrylic
What your quote should include
- What happens if they find more damage
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
- Who will actually do the work
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Herefordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Our work in Pontshill Marsh
Pontshill Marsh is about 3 miles south-east of Ross-on-Wye, in Herefordshire. Across the HR9 area, a technician comes to you. Pontshill Marsh is one of 255 towns and villages in Herefordshire we cover. Our nearest city page is Birmingham, about 48 miles away.
Jobs in HR9 are booked in the same way as anywhere else. Neighbouring places we cover include Pontshill (1 mile west), Hope Mansell (2 miles south-west), Howle Hill (2 miles south-west), Drybrook (3 miles south) and Coughton (3 miles west). We also work in nearby towns such as Hereford (14 miles north-west), Ross-on-Wye (3 miles north-west), Ledbury (11 miles north), Redhill (13 miles north-west), Newton Farm (14 miles north-west) and Merrivale (3 miles west).
Near you in Pontshill Marsh
Locally, our jobs take us to homes close to Lea CofE Primary School and Church of St John the Baptist, among other places. Further afield, we also cover the area around Ross on Wye Hospital (2.9 miles north-west) and Eccleswall Castle (1.1 miles north-east). For a walk, there’s Wigpool and Chase Wood Hill.
Places near Pontshill Marsh
More services for Pontshill Marsh
Repair or replace in Pontshill Marsh?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why choose Surface Doctor in Pontshill Marsh
- One visit for most repairs
- Work done at your home or business
- Free fixed quotes from pictures
- Same prices wherever you are
See our pricing or bath cost comparison.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Looking after it afterwards
Looking after the surface is easy:
- Don’t leave razors or cans standing in the bath
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
- Rinse it down after each bath
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It typically takes a morning or an afternoon, and you can get on with other things while we are there.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Clear the area around the damage
- Tell us if there are stairs or a lift
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
