Kent · England

Bath chip & crack repair in Printstile, Kent

Bath repair in and around Printstile: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Rust by the waste and overflow
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Printstile

Keeping it looking good

So the finish stays in good condition for years:

  • Put a towel in the bath if you are working above it
  • Rinse the bath after use, especially in hard water areas
  • If an acrylic bath flexes, have its feet adjusted
  • Keep abrasive pads and gritty cleaners away from the bath

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

How we handle bath repair in Printstile

Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you are dealing with an old repair that has yellowed or come loose and hairline or through cracks in acrylic, we can normally put it right.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Rusty chip next to a bath plughole, before and after repair
Where
Printstile (TN3)
Region
Kent
Cover
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

When a repair isn’t the answer

In fairness, some problems need a different fix:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Leaking fittings, which need a plumber

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Printstile

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

Do you need bath repair in Printstile?

Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

You may need us if you’ve spotted:

  • Deep scratches in acrylic
  • A hole punched through by something heavy
  • Snagging damage from a refit
  • Damage beneath the taps

What to look for in a quote

  • What happens if they find more damage
  • A fixed quote, and whether VAT is included
  • Whether there are any call-out or travel charges
  • When it can be used again

Choosing a repair company

Different materials, different repairs

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Why repair rather than replace?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Typically one visit, start to finish
  • Rooms protected and left tidy
  • Everything repaired in place
  • We will tell you if it’s not worth repairing

See our prices page and guide to resurfacing and replacement costs.

What bath repair costs

Repairs from £95. Every quote is fixed and free. What we take into account:

  • Whether we combine several jobs
  • The size and number of damaged areas
  • Where the damage is and how we get to it
  • The type of damage

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Getting a price from photos

We price nearly every job from pictures. This is what to send:

  • The material, if you know it
  • One picture of the whole bath
  • Something in shot to show the size
  • Natural light rather than flash

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Printstile: your questions answered

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

What areas do you cover?

The whole UK, including all of Kent. Send your postcode with your photos and we’ll confirm dates.

What information do you need?

Some photos, your postcode and how to reach you. On the day, access to the room.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What if the damage is worse than the pictures show?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

Will the repair last?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Printstile and the surrounding area

Printstile is about 3 miles north-west of Royal Tunbridge Wells, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Printstile is one of 922 places in Kent we cover. Our jobs stretch from Printstile to London (about 26 miles away).

We work across the TN3 postcode area and the streets around it. Whether you live on Penshurst Road and Barden Road or anywhere nearby, we can come to you. Printstile sits on or near the B2176, so getting to you is simple. Neighbouring places we cover include Bidborough (1 mile east), Speldhurst (1 mile south), Poundsbridge (1 mile south-west), Stockland Green (1 mile south-east) and Bullingstone (2 miles south). We also work in nearby towns such as Maidstone (15 miles north-east), Sevenoaks (8 miles north), Royal Tunbridge Wells (3 miles south-east), Tonbridge (3 miles north-east), Kings Hill (11 miles north-east) and Paddock Wood (8 miles east).

What’s near Printstile

Typical jobs here are in homes near St Gregory's Catholic School and Parish Church of St Lawrence. The nearest railway station is Leigh (Kent) station, roughly 1.7 miles north of the centre. Other landmarks nearby include Tonbridge Cottage Hospital (2.6 miles east) and The Milne Museum (3.2 miles north-east). For a walk, there’s Barden Lake and Broadwater Warren RSPB Reserve.

Map of Printstile © OpenStreetMap contributors

How the visit works

We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a morning or an afternoon, and we will keep you posted as we go.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the next day.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access
  • Keep children and pets away from the room on the day

How to get a price

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Send pictures for a quote

Advice

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.