Bedford Borough · England
Bath Repair in Sevick End
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Sevick End. Free, fixed quotes from your photos.
- Repairs from £95
- Chips on the rim or sides
- Scratches you can feel with a fingernail
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
Bath repair at your home in Sevick End
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s snagging damage from a refit and damage beneath the taps, we can typically put it right, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Sevick End (MK44)
- Region
- Bedford Borough
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Sevick End
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- One visit for most repairs
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- One-year guarantee on every repair
See our full price list or bath cost comparison.
What happens on the day
We work cleanly and quietly. Protection goes down first, then the work takes a few hours, depending on the damage. Before we leave, we explain how soon it can be used and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Ensure the area is dry
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
Common questions in Sevick End
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Sevick End.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
What does bath repair cost?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your MK44 postcode.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Common problems we fix in Sevick End
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
You may need us if you’ve spotted:
- Chips caused by builders
- Hairline or through cracks in acrylic
- Scratches you can feel with a fingernail
- Chips under the taps
Comparing quotes
- How the colour is matched
- Who turns up on the day
- What happens if they find more damage
- How to look after the finish
What else we do in Sevick End
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
How we price bath repair
Prices start from £95. Prices are worked out job by job. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Doing more than one item at once
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the photos on your phone. Just ensure we can see:
- Where you are, by postcode
- Something in shot to show the size
- A picture taken from further back
- A clear, close picture of the problem area
Most clients in Sevick End get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Covering Sevick End
Sevick End is about 3 miles north-east of Bedford, in Bedford Borough. Across the MK44 area, we carry out the work at your property. Sevick End is one of 94 places in Bedford Borough where we work. You can also see our page for London, about 49 miles away.
We cover every part of MK44. We regularly work on streets such as Renhold Road and Avenue Lane. If you’re just outside Sevick End, we cover Renhold (1 mile south-west), Ravensden (1 mile west), Salph End (1 mile south-west), Putnoe (2 miles south-west) and Goldington (2 miles south-west). We also work in nearby towns such as Bedford (3 miles south-west), Kempston (6 miles south-west), Cauldwell (5 miles south-west), Wixams (7 miles south-west), Wootton (8 miles south-west) and Shortstown (5 miles south).
What’s near Sevick End
Our clients here include homes close to Mark Rutherford School, Church of St Nicholas and Wilden CofE VA Primary School and the streets around them. For rail, the closest station is Bedford St Johns station, about 4.3 miles south-west. Further afield, we also cover the area around Great Barford Castle (1.1 miles south-east) and Bedford Hospital (4.5 miles south-west). For a walk, there is Cople Pits.
About our accreditations · Every repair comes with a one-year guarantee.
