Central Bedfordshire · England
Bath chip & crack repair in Sewell, Central Bedfordshire
Fixed-price bath repair in Sewell and the surrounding area, usually in one visit and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- A chipped rim or side

About our bath repair in Sewell
Most of our bath repairs take a few hours, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people get in touch are hairline or through cracks in acrylic and rusty patches near the plughole.
Big or small, you get the same one-year guarantee.

- Location
- Sewell (LU6)
- County
- Central Bedfordshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
So the finish stays in good condition for years:
- A dripping tap stains enamel, so fix it early
- Get any new chip repaired before it rusts
- Do not scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
When to call us in Sewell
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Chips on the rim or sides
- A hole punched through by something heavy
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
Questions to ask before you book
- How soon you can use it again
- Whether they match the colour on site
- How to care for the finish
- What happens if the damage is worse than the photos show
What affects the price in Sewell
Repairs from £95. We charge the same across the UK, including Sewell. What changes the price is:
- How many items we do on one visit
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Access to the area
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Any details about the material
- A coin beside the damage so we can judge size
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What we cannot put right
We would rather lose a job than do one that will not last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
How it works
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Clear the area around the damage
- Let us know which floor the room is on
- Let us know about parking or access
Getting a price
If you are in Sewell and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- One price list for the whole UK
- Fixed prices from your pictures
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Take a look at our pricing or guide to resurfacing and replacement costs.
Common questions in Sewell
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
When can I have a bath again?
Normally by the following day, depending on the repair.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you cover Sewell?
Yes. We work across the UK and come to Sewell. Send us photos for a fixed quote, or call 0345 017 0787.
About Sewell
Sewell is about 2 miles north-west of Dunstable, in Central Bedfordshire. Our repair technicians come to homes and businesses in Sewell and the surrounding area, so there’s no workshop to go to. We work in all 121 towns and villages across Central Bedfordshire. Our nearest city page is London, about 34 miles away.
Our technicians cover all of the LU6 postcode area and the streets around it. That includes homes on Sewell Lane and Sewel Springs and the roads around them. Close by, we cover Totternhoe (1 mile south-west), Dunstable (2 miles south-east), Well Head (2 miles south), Eaton Bray (2 miles south-west) and Edlesborough (3 miles south-west). Larger places within reach include Leighton Buzzard (5 miles west), Flitwick (8 miles north), Linslade (6 miles west), Shefford (13 miles north-east), Ampthill (9 miles north) and Lower Stondon (13 miles north-east).
Near you in Sewell
Our clients here include homes close to St Fremund the Martyr, Beecroft Academy and All Saints Academy Dunstable, among other places. The nearest railway station is Leagrave station, about 4.1 miles east of the centre. Further afield, we also cover the area around Luton and Dunstable Hospital (3.4 miles east) and Chalgrave Castle (2.8 miles north). Not far away are Ivinghoe Beacon and Sewell Cutting.
- Parks and local facilities nearby include South Bedfordshire (1.4 miles north)
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Places near Sewell
More services for Sewell
About our accreditations · Every repair comes with a one-year guarantee.

