Kent · England

Bath Repair in Singlewell or Ifield

Bath repair in Singlewell or Ifield without the cost of replacing. Get a fixed quote from your photos, then book a visit.

  • Repairs from £95
  • Chips along the edge of the bath
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Singlewell or Ifield

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Check that an acrylic bath doesn’t move when you stand in it
  • Avoid scourers, wire wool and gritty cream cleaners
  • Store metal items away from the bath
  • Cover the bath during DIY or decorating

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

How we handle bath repair in Singlewell or Ifield

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. Typical jobs include chips on the rim or sides and chips caused by builders, in pressed steel enamel, acrylic and roll-top & freestanding.

Your repair is guaranteed for a year, as with every job we do.

Location
Singlewell or Ifield (DA12, DA11, DA13)
County
Kent
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Common problems we fix in Singlewell or Ifield

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.

You may need us if you’ve spotted any of these:

  • Damage beneath the taps
  • Holes from dropped items
  • Scratches you can feel with a fingernail
  • Hairline or through cracks in acrylic

Before booking anyone

  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price
  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled

10 questions to ask before booking

How we price bath repair

Repairs from £95. You will not pay by the hour. The price depends on:

  • How much damage there is
  • Access to the area
  • The material
  • How hard the colour is to match

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.

Quotes from your photos

Phone photos are fine, there’s no need for anything special. Ensure they show:

  • A coin or ruler next to the damage for scale
  • The material, if you know it
  • One picture of the whole bath
  • Natural light rather than flash

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

What we can’t put right

We’ll always be straight with you, so here’s what a repair won’t do:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath worn all over, where resurfacing makes more sense
  • Cracks in parts of an acrylic bath we can’t get to from below

Not sure? Send photos and we’ll give you a straight answer before booking.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your pictures, we will talk to you before going ahead.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

Before we arrive

  • Let us know which floor the room is on
  • Let us know about parking or access
  • Keep pets and children out of the room while we work

How to get a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.

Send pictures for a quote

Advice

Covering Singlewell or Ifield

Singlewell or Ifield is about 1 mile south of Gravesend, in Kent. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Singlewell or Ifield is one of 922 towns and villages in Kent we cover. You can also see our page for London, about 21 miles away.

Postcode districts we cover here: DA12, DA11 and DA13. From North Lane, Scott Road and Sandown Road or a nearby road, we can come to you. Nearby, we also work in Henhurst (1 mile south-east), Istead Rise (1 mile south-west), Gravesend (1 mile north), Windmill Hill (2 miles north) and Northfleet Green (2 miles west). Further out, we also cover Maidstone (12 miles south-east), Dartford (7 miles west), Sevenoaks (12 miles south-west), Tonbridge (15 miles south), Swanley (9 miles west) and Kings Hill (10 miles south).

Around Singlewell or Ifield

Locally, our jobs take us to homes close to Church of St Margaret, Jeskyns and Saint George's Church of England School, among other places. Also close by are The George Inn (under half a mile south-east), Thamesview School (1.2 miles north-east) and Singlewell Primary School (under half a mile east). The nearest railway station is Meopham station, about 1.9 miles south-west. Other landmarks nearby include Gravesham Museum (2.1 miles north) and Stone Castle (4.7 miles north-west). Green spaces nearby include Rede Common and Gad's Hill.

Map of Singlewell or Ifield © OpenStreetMap contributors

What your bath is made of matters

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Repairing versus replacing in Singlewell or Ifield

Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why us?

  • CHAS and Constructionline accredited
  • Everything repaired in place
  • We leave the room as we found it
  • Work done at your home or business

Read our full price list or guide to resurfacing and replacement costs.

Questions from Singlewell or Ifield

How long before I can use the bath?

Usually within a day, though it depends on what we’ve done.

Can you price it without visiting?

Nearly always. If photos do not show enough, we will ask for another angle.

What areas do you cover?

All of Kent, and the rest of the UK. Travel is included in the price.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Will the repair show?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference.

Can you repair a crack in an acrylic bath?

Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.

Something went through my bath. Can it be fixed?

Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Can I fix it myself?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.