Norfolk · England
Bath chip & crack repair in Skeyton, Norfolk
Local bath repair for Skeyton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- A chip where the taps sit
Prices and what affects them
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- The material
- Unusual colours or finishes
- Access to the area
- Doing more than one item at once
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- One picture of the entire bath
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Natural light rather than flash
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
About our bath repair in Skeyton
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Typical jobs include rust by the waste and overflow and chips caused by builders, on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Skeyton (NR10)
- County
- Norfolk
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Skeyton
More services for Skeyton
Landlords, agents and businesses in Skeyton
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Common problems we fix in Skeyton
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Signs it’s time to call us include:
- Chips caused by builders
- A hole punched through by something heavy
- A chip where the taps sit
- Rusty patches near the plughole
Comparing quotes
- How soon you can use it again
- Aftercare advice
- How your room will be protected
- A fixed price, and whether VAT is included
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a morning or an afternoon. Before we go, we will explain when it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Where we work around Skeyton
Skeyton is about 4 miles south-west of North Walsham, in Norfolk. Clients in Skeyton get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Skeyton is one of 797 places in Norfolk where we work.
We cover every part of the NR10 postcode area and the streets around it. Neighbouring places we cover include Swanton Abbott (1 mile east), Badersfield (1 mile south), Lamas (2 miles south), Westwick (2 miles north-east) and Buxton (2 miles south-west). Further out, we also cover Norwich (10 miles south), Sprowston (9 miles south), Thorpe St Andrew (10 miles south), North Walsham (4 miles north-east), Sheringham (12 miles north-west) and Norwich Lanes (11 miles south).
Around Skeyton
We visit homes around Swanton Abbott Community Primary School, Felmingham Cutting and Church of All Saints. Skeyton’s nearest station is Worstead station, about 3 miles east. Other landmarks nearby include Burgh next Aylsham (2.2 miles west) and Norfolk Motorcycle Museum (3 miles north-east).
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
- Keep abrasive pads and gritty cleaners away from the bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Skeyton questions
Are there extra charges for Skeyton?
Travel is included in the price, with the same prices everywhere we work.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Skeyton. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- A fixed quote before booking
- A year’s guarantee on all work
- Usually one visit, start to finish
- No need to remove anything
Read our pricing or bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
