Newcastle upon Tyne · England

Bath Repair for Slatyford homes

Bath repair for Slatyford, without a refit. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • A kit repair that didn’t last
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Slatyford

Bath repair in Slatyford without replacing anything

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can normally use the bath the next day. We’re frequently asked to fix scuffs and scratches in the surface and chips caused by builders, across pressed steel enamel, roll-top & freestanding and cast iron enamel.

Whatever the size of the job, it’s backed by a one-year guarantee.

Area
Slatyford (NE5, NE15, NE4)
Area hub
Newcastle upon Tyne
Cover
A year, on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Prices and what affects them

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • Access to the area

The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.

Getting a price from photos

Most quotes are done from photos alone. To help us price it:

  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • A wider photo showing the entire bath

The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Slatyford and the surrounding area

Slatyford is about 2 miles west of Newcastle upon Tyne, in Newcastle upon Tyne. Anywhere in NE5, a technician comes to you. Our repair technicians cover 63 places in Newcastle upon Tyne, from the larger towns to small villages.

Jobs in NE5, NE15 and NE4 work the same way as everywhere else we cover. Whether you live on Pooley Road, Dewley Road and Farlam Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Denton (1 mile west), East Denton (1 mile south-west), Cowgate (1 mile east), Fenham (1 mile south-east) and Westerhope (1 mile north-west). Larger places within reach include Bensham (4 miles south-east), Carr Hill (5 miles south-east), Low Fell (5 miles south-east), Deckham (4 miles south-east), Sheriff Hill (5 miles south-east) and Westgate (3 miles south-east). Slatyford is one of the larger places we cover in Newcastle upon Tyne.

Around Slatyford

We visit homes around Dame Allan's School, Thomas Walling Primary Academy and Fox and Hounds pub and the streets around them. Nearby too are Benwell Nature Park (1.1 miles south), Holy Cross Church (0.6 miles south-east) and Hilton Primary Academy (under half a mile north). Slatyford’s nearest station is Blaydon station, roughly 2.2 miles south-west. Well-known places in the area include Shefton Museum (2.5 miles east) and Metrocentre (2.3 miles south). The countryside around Slatyford includes Bent Hill and Addison and Hedgefield Woods.

  • Parks and local facilities nearby include Denton (1.6 miles west)
Map of Slatyford © OpenStreetMap contributors

Common problems we fix in Slatyford

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

People generally call us when they notice one of these:

  • An old repair that has yellowed or come loose
  • Impact holes in acrylic
  • Rust by the waste and overflow
  • Deep scratches in acrylic

What your quote should include

  • What happens if the damage is worse than the photos show
  • What the guarantee covers, and for how long
  • How your room will be protected
  • What preparation is included

How to compare quotes

What we do, step by step

There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take two to three hours for most chips, including clearing up.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Point us to the nearest place to park
  • Ensure the area is dry

Getting a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a fixed price

Related advice

Should you replace it?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Colours mixed by hand to suit your surface
  • Same prices wherever you are
  • Everything repaired in place

Read our pricing and guide to resurfacing and replacement costs.

Questions from Slatyford

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

When can I have a bath again?

Normally by the following day, depending on the repair.

Will the repair show?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Can you fix rust around the plughole?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

It’s been repaired before. Can you still fix it?

Typically, yes. The old repair comes out first, so let us know about it.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Is there a guarantee?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • Cracks in acrylic we cannot reach from underneath
  • Metal that has corroded all the way through
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Protect the bath with a towel when doing jobs nearby
  • Fix dripping taps early to stop staining and limescale
  • Keep abrasive pads and gritty cleaners away from the bath
  • Get any new chip repaired before it rusts

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

Landlords, agents and businesses in Slatyford

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.