Lincolnshire · England
Bath Repair in Snitterby
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Snitterby, with a one-year guarantee on every repair.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Hairline or through cracks in acrylic
When to call us in Snitterby
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a picture:
- Impact holes in acrylic
- An old repair that has yellowed or come loose
- A chipped rim or side
- Chips caused by builders
Comparing quotes
- What aftercare is recommended
- Whether the price covers travel
- What the guarantee covers, and for how long
- How long it needs to cure
Bath repair in Snitterby, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because the bath does not move. Typical jobs include a chipped rim or side and cracks in an acrylic bath, in cast iron enamel, whirlpool & spa baths and acrylic.
Whatever the size of the job, you get the same one-year guarantee in Snitterby and across Lincolnshire.
- Area
- Snitterby (DN21)
- Region
- Lincolnshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- The size and number of damaged areas
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- The material, if you know it
- One picture of the whole bath
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Repair or replace in Snitterby?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Everything repaired in place
- Colour-matched on site
- One visit for most repairs
- We come to you, anywhere in the UK
Take a look at our full price list or guide to resurfacing and replacement costs.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. Allow a few hours, depending on the damage.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the next day, the bath is ready to use.
Preparing for the visit
- Let us know if it has been repaired before
- Let the surface dry out before the visit
- Open a window if you can
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Related advice
Questions from Snitterby
Can a cracked acrylic bath be fixed?
Typically, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
When can I have a bath again?
Normally by the following day, depending on the repair.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Are there extra charges for Snitterby?
We don’t add a call-out fee. Your fixed price includes everything.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Aftercare tips
Once the work has cured, treat it gently:
- Cover the bath during DIY or decorating
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Nearby places to Snitterby
Other services in Snitterby
Covering Snitterby
Snitterby is about 11 miles south-east of Scunthorpe, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Snitterby is one of 732 places in Lincolnshire where we work. Our jobs stretch from Snitterby to Leeds (49 miles away).
Here we cover the DN21 postcode area. Jobs here include addresses on High Street, Church Lane and School Lane and the roads around them. Neighbouring places we cover include Waddingham (1 mile north), Atterby (1 mile south), Bishop Norton (1 mile south), Blyborough (3 miles west) and Grayingham (3 miles west). Larger places within reach include Lincoln (15 miles south), Gainsborough (11 miles west), Ermine (13 miles south), Market Rasen (8 miles south-east), Welton (9 miles south) and New Boultham (15 miles south).
Local landmarks in Snitterby
Around Snitterby, we work in homes near Waddingham Primary School, The Marquis of Granby pub and Church of St Nicholas and the streets around them. The nearest railway station is Kirton Lindsey station, about 4.4 miles north-west of the centre. Nearby you’ll also find Bomber County Aviation Museum (3.6 miles south-west) and Castle Hills (3.3 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
