Cheshire East · England

Bath Repair for Somerford Booths homes

We travel to Somerford Booths for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • A kit repair that didn’t last
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Somerford Booths homes

Do you need bath repair in Somerford Booths?

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.

Look out for these signs:

  • Chips on the rim or sides
  • Rust spots around the plughole
  • An old repair that has yellowed or come loose
  • A hole punched through by something heavy

Questions to ask before booking

  • What prep work is covered
  • How the colour is matched
  • If travel is included in the price
  • How the room is protected while they work

How to compare quotes

Bath repair at your home in Somerford Booths

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for an old repair that has yellowed or come loose and scuffs and scratches in the surface, on whirlpool & spa baths, cast iron enamel and acrylic.

You get a one-year guarantee, the same in Somerford Booths as everywhere else we work.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Somerford Booths (CW12)
County
Cheshire East
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Landlord and trade work in Somerford Booths

We work for landlords, letting agents and housing providers in Somerford Booths as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

About Somerford Booths

Somerford Booths is about 2 miles north-west of Congleton, in Cheshire East. Our repair technicians come to homes and businesses in Somerford Booths and the surrounding area, so nothing has to leave your home. Somerford Booths is one of 254 towns and villages in Cheshire East where we work. You can also see our page for Manchester, about 20 miles away.

Our visits in CW12 work the same way as everywhere else we cover. Whether you live on Clement Road, Chelford Road and Hill Drive or a nearby road, we can come to you. Other places close to Somerford Booths include Newsbank (1 mile north-east), Radnor (1 mile south), Hulme Walfield (1 mile east), Brereton Heath (1 mile west) and Somerford (1 mile west). Larger places within reach include Crewe (10 miles south-west), Macclesfield (7 miles north-east), Wilmslow (10 miles north), Nantwich (14 miles south-west), Knutsford (9 miles north-west) and Middlewich (8 miles west).

Around Somerford Booths

Around Somerford Booths, we work in homes near Congleton High School and St Michael's Church and the streets around them. Somerford Booths’s nearest station is Congleton station, about 3.3 miles south-east. For a walk, there’s Astbury Mere and The Cloud.

Map of Somerford Booths © OpenStreetMap contributors

Repairing versus replacing in Somerford Booths

Replacing a fitted bath normally means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in one visit. Prices start from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Why choose Surface Doctor in Somerford Booths

  • Technicians who travel to you, UK-wide
  • Generally one visit, start to finish
  • Dust sheets down, tidy finish
  • Colours mixed by hand to suit your surface

See our full price list or resurfacing vs replacement cost guide.

Different materials, different repairs

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

How it works

Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Mention any earlier repairs or resurfacing

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Related advice

Somerford Booths questions

How much does bath repair cost in Somerford Booths?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

What about rust by the waste?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can you quote from pictures?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

How to look after the repair

Much of the damage we repair could have been avoided. A few tips:

  • Cover the bath during DIY or decorating
  • Don’t leave razors or cans standing in the bath
  • Give the bath a quick rinse after use
  • Have new chips seen to early

Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

When we would advise against a repair

Some jobs are not right for a repair, including:

  • Cracks in acrylic we cannot reach from underneath
  • A bath worn all over, where resurfacing makes more sense
  • Metal that has corroded all the way through

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic

What affects the price in Somerford Booths

Repairs from £95. A fixed quote means you know the cost before you book. We take into account:

  • Any earlier repairs that need removing first
  • The material and finish
  • How hard the colour is to match
  • Where the damage is and how we get to it

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

Getting a price from photos

You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:

  • A coin beside the damage so we can judge size
  • Details of any past repairs
  • The material, if you know it
  • A clear, close picture of the problem area

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.