Bedford Borough · England
Bath Repair in Souldrop
Problem with your bath in Souldrop? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Damage beneath the taps
- Damage done while the bathroom was being fitted
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Bath repair in Souldrop, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Common call-outs are for damage beneath the taps and cracks in an acrylic bath, in cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Big or small, it’s backed by a one-year guarantee in Souldrop and across Bedford Borough.
- Location
- Souldrop (MK44)
- Area hub
- Bedford Borough
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Souldrop
Other services in Souldrop
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Souldrop customers choose us
- Everything repaired in place
- Honest advice, even when it means no job
- Every repair guaranteed for a year
- Rooms protected and left tidy
See our full price list or guide to resurfacing and replacement costs.
Covering Souldrop
Souldrop is about 4 miles south-east of Rushden, in Bedford Borough. Our repair technicians come to clients in Souldrop and the surrounding area, so you don’t need to take anything anywhere. We cover 94 places in Bedford Borough, from the larger towns to small villages. Our jobs stretch from Souldrop to London (55 miles away).
Our visits in MK44 are booked in the same way as anywhere else. Jobs here include addresses on High Street and Sharnbrook Road. Nearby, we also work in Knotting Green (1 mile north-east), Sharnbrook (1 mile south), Knotting (2 miles north-east), Felmersham (3 miles south) and Newton Bromswold (3 miles north). Larger places within reach include Bedford (8 miles south-east), Kempston (9 miles south), Cauldwell (9 miles south-east), Wixams (12 miles south), Wootton (10 miles south) and Goldington (9 miles south-east).
Landmarks near Souldrop
Around Souldrop, we work in homes near Church of All Saints, Higham Park and Sharnbrook Academy. Other landmarks nearby include Rushden Museum (3.5 miles north-west) and Odell Castle (2.7 miles south-west). For a walk, there’s Sharnbrook Summit.
What affects the price in Souldrop
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The material and finish
- Access to the area
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- A close-up of the damage, in focus
- A photo taken from further back
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
To get a price, send a couple of photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Common problems we fix in Souldrop
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Most people get in touch when they notice something like this:
- A failed DIY repair that is discoloured or lifting
- Chips caused by builders
- Rusty patches near the plughole
- Chips along the edge of the bath
What your quote should include
- How your room will be protected
- What preparation is included
- Who will actually do the work
- Whether the colour is mixed to match
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Souldrop
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Common questions in Souldrop
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Can you repair a hole in a bath?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Which areas do you work in?
All of Bedford Borough, and the rest of the UK. Travel is included in the price.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
How the visit works
You do not need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It typically takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Let the surface dry out before the visit
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
