Oxfordshire · England

Bath Repair for South Leigh homes

We travel to South Leigh for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Rusty patches near the plughole
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near South Leigh

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Bath repair in South Leigh, done in place

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. We work on pressed steel enamel, roll-top & freestanding and acrylic, and the jobs we see most are hairline or through cracks in acrylic and rust by the waste and overflow.

Big or small, it’s backed by a one-year guarantee.

Location
South Leigh (OX29)
County
Oxfordshire
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

What we are called out for in South Leigh

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

The most common problems we are called about are:

  • Damage beneath the taps
  • A kit repair that didn’t last
  • Rust spots around the plughole
  • Scuffs and scratches in the surface

Questions to ask before you book

  • Whether the colour is mixed to match
  • How long it needs to cure
  • What happens if the damage is worse than the photos show
  • Whether the price is fixed and includes VAT

10 questions to ask before booking

What we can’t put right

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath worn all over, where resurfacing makes more sense
  • A steel bath rusted through

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding

Should you replace it?

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • One visit for most repairs
  • Every repair guaranteed for a year
  • Colours mixed by hand to suit your surface

Take a look at our pricing and bath cost comparison.

South Leigh questions

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

What does bath repair cost?

Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How invisible is a bath repair?

On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Where we work around South Leigh

South Leigh is about 3 miles east of Witney, in Oxfordshire. Anywhere in OX29, we carry out the work at your property. South Leigh is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for Birmingham, about 52 miles away.

Postcode districts we cover here: OX29. That includes homes on Station Road, Church End and Chapel Road. If you’re just outside South Leigh, we cover High Cogges (1 mile west), Madley Park (2 miles north-west), Hardwick (2 miles south-west), Cogges (2 miles west) and Stanton Harcourt (2 miles south-east). We also work in nearby towns such as Oxford (9 miles east), Didcot (14 miles south-east), Bicester (15 miles north-east), Abingdon-on-Thames (9 miles south-east), Witney (3 miles west) and Carterton (7 miles west).

Near you in South Leigh

In South Leigh, that means homes near Wood Green School and Church of St James and the streets around them. The closest station to South Leigh is Hanborough station, about 4.1 miles north-east. Well-known places in the area include Cogges Manor Farm Museum (2.1 miles west).

Map of South Leigh © OpenStreetMap contributors

The process

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the following day.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Have a window or extractor fan available
  • Ensure the area is dry

Get a quote

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a free quote

Advice

How we price bath repair

Repairs from £95. There’s no charge for travel to South Leigh. The price depends on:

  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • What kind of damage it is
  • How many areas need work

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your photos

Phone pictures are fine. Just ensure we can see:

  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • A wider photo showing the entire bath

Email us a picture of the damage and one of the whole item, with your OX29 postcode, and we’ll reply with a fixed quote.

How to look after the repair

Looking after the surface is easy:

  • Cover the bath during DIY or decorating
  • Fix dripping taps early to stop staining and limescale
  • Do not leave razors or cans standing in the bath
  • Get any new chip repaired before it rusts

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.