Kent · England
Bath Repair in Speed Gate
Fixed-price bath repair in Speed Gate and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- Chips under the taps
About our bath repair in Speed Gate
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on acrylic, pressed steel enamel and whirlpool & spa baths, and common reasons people contact us are chips on the rim or sides and rusty patches near the plughole.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Speed Gate (DA3)
- Area hub
- Kent
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we take into account:
- The material
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- Doing more than one item at once
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- One picture of the entire bath
- The material, if you know it
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
How to care for the repair
It’s all simple stuff:
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- If an acrylic bath flexes, have its feet adjusted
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Landlords, letting agents and housing providers in Speed Gate use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Signs you need bath repair in Speed Gate
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
These are the problems we are asked about most:
- Scuffs and scratches in the surface
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
- Chips caused by builders
Before booking anyone
- What happens if they find more damage
- How your room will be protected
- A fixed quote, and whether VAT is included
- Whether they match the colour on site
Speed Gate and the surrounding area
Speed Gate is about 5 miles south of Dartford, in Kent. We visit customers in Speed Gate and nearby villages, so you don’t need to take anything anywhere. Our repair technicians cover all 922 towns and villages in Kent, from the larger towns to small villages. We work right across the region, from Speed Gate to London (18 miles away).
All of DA3 is within our area. Neighbouring places we cover include Fawkham Green (1 mile south-east), West Yoke (1 mile east), Ash (1 mile south-east), Maplescombe (2 miles south-west) and West Kingsdown (2 miles south). Within a short drive, we also cover Maidstone (13 miles south-east), Dartford (5 miles north), Sevenoaks (7 miles south-west), Gravesend (6 miles north-east), Tonbridge (12 miles south) and Northfleet (5 miles north-east).
Near you in Speed Gate
In Speed Gate, that means homes near Longfield Academy and The Rising Sun pub and the streets around them. The nearest railway station is Longfield station, roughly 2.3 miles north-east. A little further out are Darent Valley Hospital (4.5 miles north) and Eynsford Castle (2.4 miles west).
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Places near Speed Gate
What else we do in Speed Gate
How the visit works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Send us photos and we will tell you honestly.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Your questions about bath repair in Speed Gate
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
About our accreditations · Every repair comes with a one-year guarantee.
