Hertfordshire · England

Bath chip & crack repair in Spellbrook, Hertfordshire

Chip and crack repairs to enamel, acrylic and cast iron baths in Spellbrook, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A chipped rim or side
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Spellbrook

Our work in Spellbrook

Spellbrook is about 2 miles south of Bishop's Stortford, in Hertfordshire. Across the CM23 area, we come to you. Spellbrook is one of 381 places in Hertfordshire we cover. You can also see our page for London, about 26 miles away.

All of CM23 and CM22 is within our area. From Oram Court, Spellbrook Lane East and Spellbrook Lane West or anywhere nearby, a technician can come to you. We also cover the places around Spellbrook: Gaston Green (1 mile east), Little Hallingbury (1 mile east), Thorley Street (1 mile north), Thorley (1 mile north-west) and Sawbridgeworth (2 miles south). Further out, we also cover Stevenage (15 miles west), Welwyn Garden City (15 miles west), Hoddesdon (9 miles south-west), Cheshunt (12 miles south-west), Hertford (10 miles west) and Ware (8 miles west).

Near you in Spellbrook

Locally, our jobs take us to homes close to Spellbrook CofE Primary School, Church of St Mary the Virgin and Leventhorpe and the streets around them. For rail, the closest station is Sawbridgeworth station, about 1.5 miles south. Well-known places in the area include Harlow Mill (3.4 miles south-west) and Henry Moore Studios and Gardens (3 miles west). Green spaces nearby include Thorley Wash nature reserve and Portingbury Hills.

Map of Spellbrook © OpenStreetMap contributors

Bath repair at your home in Spellbrook

We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We are frequently asked to fix chips on the rim or sides and cracks in an acrylic bath, across roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.

The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.

Location
Spellbrook (CM23, CM22)
County
Hertfordshire
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Questions from Spellbrook

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Is there a guarantee?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Can a cracked acrylic bath be fixed?

Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.

How do I get a price for bath repair in Spellbrook?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Will I be able to see the repair?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

How we price bath repair

Prices start from £95. There’s no charge for travel to Spellbrook. The price comes down to:

  • What kind of damage it is
  • Any earlier repairs that need removing first
  • How many items we do on one visit
  • The colour and finish to match

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Quotes from your pictures

A couple of clear pictures is all it takes. Try to include:

  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • Where you are, by postcode

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.

Looking after it afterwards

Aftercare is simple:

  • Give the bath a quick rinse after use
  • Have new chips seen to early
  • Clean with warm water and a mild detergent
  • Make sure an acrylic bath is firm underfoot

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.

Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.

What happens on the day

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, depending on the damage, and we will keep you posted as we go.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Have a window or extractor fan available
  • Have somewhere for us to park nearby if possible
  • Avoid using the area for a few hours before we arrive

Get a quote

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Related advice

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

For anyone letting property in or around Spellbrook, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Should you replace it?

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor in Spellbrook

  • One-year guarantee on every repair
  • CHAS, Constructionline and SafeContractor accredited
  • Colours mixed by hand to suit your surface
  • Fixed prices from your pictures

Read our full price list and bath cost comparison.

What we cannot put right

We’d rather lose a job than do one that will not last, so these are the limits:

  • A bath that moves underfoot, until its support is fixed
  • Acrylic cracks with no access behind them
  • A bath worn all over, where resurfacing makes more sense

Send us photos and we’ll tell you honestly before booking.

Surfaces we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel

Common problems we fix in Spellbrook

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

The most common problems we’re called about are:

  • Holes from dropped items
  • Rust spots around the plughole
  • A kit repair that didn’t last
  • Chips under the taps

Before you book anyone

  • What the guarantee covers, and for how long
  • How the colour is matched
  • How long it needs to cure
  • What preparation is included

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.