Pembrokeshire · Wales
Bath Repair in St Elvis
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in St Elvis, with a one-year guarantee on every repair.
- Repairs from £95
- Deep scratches in acrylic
- Cracks in an acrylic bath
About our bath repair in St Elvis
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Whether it’s snagging damage from a refit and hairline or through cracks in acrylic, we can help, on acrylic, cast iron enamel and whirlpool & spa baths alike.
Whatever the size of the job, you get the same one-year guarantee in St Elvis and across Pembrokeshire.
- Where
- St Elvis (SA62)
- Area hub
- Pembrokeshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath repair in St Elvis?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
Keep an eye out for any of the following:
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
- A chip where the taps sit
- Rust by the waste and overflow
Before you book anyone
- Whether there are any call-out or travel charges
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- What preparation is included
Where we work around St Elvis
St Elvis is about 10 miles north-west of Haverfordwest, in Pembrokeshire. Clients in St Elvis get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. St Elvis is one of 223 places in Pembrokeshire where we work.
Here we cover the SA62 postcode area. From Main Street, Y Gribin and New Street or anywhere nearby, we can come to you. Close by, we cover Solva (1 mile north-west), Lower Solva (1 mile north-west), Solfach (1 mile west), Middle Mill (1 mile north) and Brawdy (2 miles east). Larger places within reach include Haverfordwest (10 miles south-east), Milford Haven (13 miles south-east), The Marsh (10 miles south-east), Fishguard (12 miles north-east), Goodwick (12 miles north-east) and Pill (13 miles south-east).
Around St Elvis
We visit homes around Church of St Teilo and The Harbour Inn, among other places. Other landmarks nearby include Whitewell (3.8 miles west) and Y Castell (1 mile north-west). Green spaces nearby include Gewni.
Also near St Elvis
Other services in St Elvis
What bath repair costs
Repairs from £95. We charge the same across the UK, including St Elvis. What changes the price is:
- How much damage there is
- How many items we do on one visit
- How hard the colour is to match
- What the surface is made of
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Phone photos are fine. Ensure they show:
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
St Elvis: your questions answered
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Which areas do you work in?
We cover the entire UK, including St Elvis and the rest of Pembrokeshire. Just include your postcode and we’ll offer you dates.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
How do I get a price for bath repair in St Elvis?
Repairs from £95. We give a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Make sure the area is dry
- Tell us if there are stairs or a lift
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Honest limits
In fairness, some problems need a different fix:
- Cracks in acrylic we cannot reach from underneath
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Put a towel in the bath if you’re working above it
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
