Greater London · England

Bath chip & crack repair in St Giles, Greater London

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in St Giles, with a one-year guarantee on every repair.

  • Repairs from £95
  • A failed DIY repair that’s discoloured or lifting
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near St Giles

Bath repair in St Giles, done in place

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for chips along the edge of the bath and hairline or through cracks in acrylic, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel.

Whatever the size of the job, it’s backed by a one-year guarantee in St Giles and across Greater London.

Before and after: a chipped, rust-stained bath around the plughole
Location
St Giles (W1F, W1D, W1T)
Area hub
Greater London
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

Prices start from £95. We do not charge extra for travel to St Giles. The price depends on:

  • The material and finish
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match
  • What kind of damage it is

Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

How to get a fixed price

Before you send photos, these tips help us give you a firm price:

  • Your postcode, so we can check dates
  • What it’s made of, if you know
  • A photo taken from further back
  • Daylight if possible, and no flash reflection

Email us a picture of the damage and one of the whole item, and tell us you’re in St Giles, and we’ll come back with a fixed quote.

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Honest limits

We’ll always be straight with you, so here’s what a repair will not do:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

Send us pictures and we’ll tell you honestly before booking.

Surfaces we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Cover the bath during DIY or decorating
  • Give the bath a quick rinse after use
  • Clean with warm water and a mild detergent
  • Do not scrub with anything abrasive

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

What we’re called out for in St Giles

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.

The most common problems we’re called about are:

  • Deep scratches in acrylic
  • Impact holes in acrylic
  • A cracked acrylic bath
  • Damage beneath the taps

What to look for in a quote

  • When it can be used again
  • Who turns up on the day
  • The length of the guarantee and what it covers
  • Whether they match the colour on site

10 questions to ask before booking

Common questions in St Giles

What information do you need?

Use the quote form or ring 0345 017 0787, and we will do the rest.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Can a cracked acrylic bath be fixed?

Normally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What areas do you cover?

All of Greater London, and the rest of the UK. There is no extra charge for travel.

What does bath repair cost?

Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your W1F postcode.

Do you repair coloured baths?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park

Ask for a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Advice

Repair or replace in St Giles?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.

Why St Giles customers choose us

  • Most jobs done in one visit
  • We leave the room as we found it
  • Colours mixed by hand to suit your surface
  • Straight answers about what a repair can do

See our full price list or guide to resurfacing and replacement costs.

Our work in St Giles

St Giles is about 1 mile east of City of Westminster, in Greater London. Across the W1F area, a technician comes to you. We cover 764 places across Greater London.

We work across the W1F, W1D and W1T postcode area. Local streets include Duck Lane, Drury Lane and Bridle Lane. St Giles is on the A301 and A400, which makes it straightforward to reach. Nearby, we also work in Seven Dials (1 mile south), West End (1 mile south-west), Soho (1 mile south-west), Covent Garden (1 mile south-east) and Chinatown (1 mile south-west). We also work in nearby towns such as Kensington (3 miles west), Walthamstow (7 miles north-east), Hampstead (4 miles north-west), Ruislip (13 miles west), Stockwell (3 miles south) and Orpington (13 miles south-east).

Near you in St Giles

Locally, our jobs take us to homes close to St Anne's Churchyard, The Crown pub and LSE Shaw Library, among other places. Also close by are St Josephs Catholic Primary School (less than half a mile north-east), Mercers' School (0.8 miles east), London Nautical School (1 mile south-east) and Soho Baptist Chapel (less than half a mile west). St Giles has its own railway station: Tottenham Court Road station. Other landmarks nearby include Museum of Comedy (less than half a mile north-east) and Metropolitan Borough of Holborn (less than half a mile north-east). Green spaces nearby include Barnsbury Wood and Ludgate Hill.

Map of St Giles © OpenStreetMap contributors

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.