Devon · England

Bath Repair for St Loye's homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in St Loye's, with a one-year guarantee on every repair.

  • Repairs from £95
  • A kit repair that didn’t last
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near St Loye's

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair will not do:

  • Leaking fittings, which need a plumber
  • Acrylic cracks with no access behind them
  • A bath worn all over, where resurfacing makes more sense

Send us photos and we will tell you honestly before you book.

What we work on

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding

Bath repair at your home in St Loye's

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about scuffs and scratches in the surface and damage beneath the taps.

All our work is covered by a one-year guarantee.

Rusty chip next to a bath plughole, before and after repair
Where
St Loye's (EX2, EX1)
County
Devon
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.

What we are called out for in St Loye's

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.

Look out for any of the following:

  • Impact holes in acrylic
  • Damage beneath the taps
  • Hairline or through cracks in acrylic
  • A failed DIY repair that’s discoloured or lifting

What your quote should include

  • How the room is protected while they work
  • The length of the guarantee and what it covers
  • Is the price fixed, and does it include VAT?
  • Whether a trained technician does the job

Choosing a repair company

Questions from St Loye's

What areas do you cover?

We cover the entire UK, including St Loye's and the rest of Devon. Send your postcode with your photos and we’ll confirm dates.

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

How do I get a price for bath repair in St Loye's?

Prices start from £95. We give a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.

Can you quote from pictures?

Normally, yes. A close-up and a wider photo are enough to give a fixed quote.

When can I have a bath again?

Normally within a day, depending on the repair.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Is there any odour?

Expect a mild smell while we’re working.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in St Loye's.

How we price bath repair

Prices start from £95. A fixed quote means you know the cost before you book. We take into account:

  • Where the damage is and how we get to it
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Quotes from your pictures

Phone photos are fine. Just make sure we can see:

  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • Details of any past repairs
  • One picture of the entire bath

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

How the visit works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes a few hours, depending on the damage. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Mention any earlier repairs or resurfacing
  • Clear toiletries, mats and anything else from around the area

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.

Get a fixed quote

Read more

Repair or replace in St Loye's?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.

Why us?

  • No need to remove anything
  • One-year guarantee on every repair
  • CHAS, Constructionline and SafeContractor accredited
  • No extra charge for your area

Read our pricing and resurfacing vs replacement cost guide.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Our work in St Loye's

St Loye's is about 1 mile south-east of Exeter, in Devon. Jobs in St Loye's are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in all 586 towns and villages across Devon.

Our technicians cover all of the EX2 and EX1 postcode area. From Hope Road, Lilac Road and Holly Road or a nearby road, a technician can come to you. Close by, we cover Digby (1 mile east), Countess Wear (1 mile south), Clyst Heath (1 mile east), Whipton (1 mile north-east) and Newcourt (1 mile south-east). Further out, we also cover Exmouth (8 miles south-east), Newton Abbot (14 miles south), Tiverton (13 miles north), Teignmouth (11 miles south), Sidmouth (12 miles east) and Honiton (14 miles east).

What’s near St Loye's

Locally, our jobs take us to homes close to Wynstream School, St Peter's Church of England Aided School and Church of Saint Michael and All Angels. Also close by are Ludwell Valley Park (0.5 miles south), Exeter School (0.6 miles north-west) and Gardeners Arms (under half a mile south). For rail, the closest station is Polsloe Bridge station, roughly 1.1 miles north of the centre. Well-known places in the area include Rougemont Castle (1.5 miles north-west) and Princesshay (1.4 miles north-west). The countryside around St Loye's includes Bowling Green Marsh RSPB reserve.

Map of St Loye's © OpenStreetMap contributors

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.