Nottinghamshire · England
Bath chip & crack repair in Stanley, Nottinghamshire
Problem with your bath in Stanley? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- Snagging damage from a refit
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
About our bath repair in Stanley
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Whether it’s chips along the edge of the bath and a cracked acrylic bath, we can normally put it right, on cast iron enamel, acrylic and whirlpool & spa baths alike.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Stanley (NG17)
- Area hub
- Nottinghamshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Clear the area around the damage
Get a quote
For a price in Stanley, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What we’re called out for in Stanley
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
It’s worth getting a quote if you see:
- Scratches you can feel with a fingernail
- Rust spots around the plughole
- Chips along the edge of the bath
- Cracks in an acrylic bath
Questions to ask before booking
- How long the guarantee is and what it covers
- When it can be used again
- If travel is included in the price
- How the room is protected while they work
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Stanley. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
- A year’s guarantee on all work
- Generally one visit, start to finish
Take a look at our full price list and bath cost comparison.
Your questions about bath repair in Stanley
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is a holed acrylic bath repairable?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How do I get a price for bath repair in Stanley?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- The colour and finish to match
- How many items we do on one visit
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any details about the material
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- A wider photo showing the entire bath
Email us a picture of the damage and one of the whole item, and tell us you’re in Stanley, and we will come back with a fixed quote.
About Stanley
Stanley is about 3 miles north-west of Sutton in Ashfield, in Nottinghamshire. Our repair technicians come to clients in Stanley and the surrounding area, so you don’t need to take anything anywhere. Stanley is one of 329 towns and villages in Nottinghamshire we cover. We work right across the region, from Stanley to Manchester (44 miles away).
Our technicians cover all of NG17 and the streets around it. We also cover the places around Stanley: Hardstoft (1 mile north-west), Tibshelf (1 mile south-west), Ault Hucknall (2 miles north), Huthwaite (2 miles south) and Stainsby (2 miles north). Larger places within reach include Mansfield (5 miles east), Worksop (14 miles north-east), Sutton in Ashfield (3 miles south-east), Hucknall (9 miles south-east), Mansfield Woodhouse (5 miles east) and Eastwood (10 miles south).
Local landmarks in Stanley
Locally, our jobs take us to homes close to Tibshelf Community School. The closest station to Stanley is Sutton Parkway station, about 3.9 miles south-east of the centre. Further afield, we also cover the area around Designer Outlet East Midlands (3.3 miles south) and Stainsby Mill (2 miles north).
Towns and villages near Stanley
What else we do in Stanley
What we can’t put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath that moves underfoot, until its support is fixed
- Wear across the whole surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Keep metal cans and razors off the surface
- Don’t scrub with anything abrasive
- Cover the bath during DIY or decorating
- If an acrylic bath flexes, have its feet adjusted
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
