South Lanarkshire · Scotland
Bath Repair in Strathaven
Bath repair for Strathaven, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Chips under the taps
- Cracks in an acrylic bath
Bath repair in Strathaven without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We work on cast iron enamel, acrylic and whirlpool & spa baths, and common reasons people get in touch are impact holes in acrylic and an old repair that has yellowed or come loose.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Strathaven (ML10)
- Region
- South Lanarkshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
In fairness, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours, depending on the damage, and we will keep you posted as we go.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Tell us about parking, stairs or access
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Where we work around Strathaven
Strathaven is about 6 miles south of Hamilton, in South Lanarkshire. We travel to homes and businesses in Strathaven and the surrounding area, so nothing has to leave your home. We cover 139 places across South Lanarkshire, from the larger towns to small villages. Our jobs stretch from Strathaven to Glasgow (15 miles away).
Jobs in ML10 work the same way as everywhere else we cover. Local streets include Main Street, Station Road and Loudon Street. Neighbouring places we cover include Sandford (2 miles south-east), Glassford (2 miles north-east), Chapelton (3 miles north-west), Stonehouse (3 miles east) and Quarter (4 miles north). Larger places within reach include East Kilbride (7 miles north-west), Hamilton (6 miles north), Cambuslang (10 miles north), Uddingston (10 miles north), Blantyre (8 miles north) and Larkhall (5 miles north-east). Strathaven is among the bigger towns we cover in South Lanarkshire.
Near you in Strathaven
Typical jobs here are in homes near East Parish Church and Strathaven Academy, among other places. Further afield, we also cover the area around Strathaven Castle (within half a mile south) and Stonehouse Hospital (3 miles east).
What we’re called out for in Strathaven
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Send us a photo if you notice any of these:
- Deep scratches in acrylic
- Damage beneath the taps
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
What your quote should include
- How the colour is matched
- What prep work is covered
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Landlords, letting agents and housing providers in Strathaven use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Also in Strathaven
Strathaven questions
Do you cover Strathaven?
Yes, we do. We send a technician to Strathaven for every job, with no extra charge for travel.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Repair or replace in Strathaven?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Strathaven
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Colour mixed on the day to match
- No need to remove anything
Take a look at our pricing or bath cost comparison.
How to care for the repair
It’s all simple stuff:
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse the bath after use, especially in hard water areas
- Fix dripping taps early to stop staining and limescale
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
