Kent · England
Bath Repair for Styants Bottom homes
We travel to Styants Bottom for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips along the edge of the bath
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bath repair in Styants Bottom, done in place
A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We are often asked to fix a cracked acrylic bath and holes from dropped items, across roll-top & freestanding, cast iron enamel and pressed steel enamel.
We stand behind the work with a one-year guarantee.
- Location
- Styants Bottom (TN15)
- County
- Kent
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Clean with warm water and a mild detergent
- Have new chips seen to early
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Signs you need bath repair in Styants Bottom
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
It’s worth getting a quote if you see:
- A chip where the taps sit
- Impact holes in acrylic
- A cracked acrylic bath
- Chips caused by builders
Comparing quotes
- How changes to the job are handled
- Whether a trained technician does the job
- Aftercare advice
- Whether the price is fixed and includes VAT
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Styants Bottom questions
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What happens next?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Do you cover Styants Bottom?
Yes. We cover the whole UK and come to Styants Bottom and the rest of Kent. Send photos and we’ll quote, or call 0345 017 0787.
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take a few hours, depending on the damage, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Styants Bottom and nearby
Styants Bottom is about 3 miles east of Sevenoaks, in Kent. Anywhere in TN15, we carry out the work at your property. Our technicians cover all 922 towns and villages across Kent. Our jobs stretch from Styants Bottom to London (21 miles away).
We work across TN15 and the streets around it. If you’re just outside Styants Bottom, we cover Oldbury (1 mile east), Ightham (1 mile south-east), Stone Street (1 mile south), Ivy Hatch (1 mile south-east) and Bitchet Green (2 miles south). Within a short drive, we also cover Maidstone (12 miles east), Dartford (11 miles north), Sevenoaks (3 miles west), Royal Tunbridge Wells (10 miles south), Gravesend (11 miles north-east) and Tonbridge (6 miles south).
Local landmarks in Styants Bottom
Around Styants Bottom, we work in homes near The Harrow Inn, Ightham Primary School and Ivy Hatch Nature Reserve, among other places. Also close by are St Lawrence (0.8 miles south) and Wrotham School (2.4 miles north-east). The nearest railway station is Kemsing station, roughly 1 mile north-west of the centre. Nearby you will also find Ightham Court (1.3 miles north-east) and Sevenoaks Hospital (2.8 miles west). Green spaces nearby include Dryhill Nature Reserve.
Nearby places to Styants Bottom
What else we do in Styants Bottom
When we would advise against a repair
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Repairing versus replacing in Styants Bottom
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Styants Bottom clients choose us
- Generally one visit, start to finish
- A year’s guarantee on all work
- No extra charge for your area
- Colours mixed by hand to suit your surface
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
