Herefordshire · England

Bath Repair for Symonds Yat homes

Local bath repair for Symonds Yat: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Symonds Yat

Bath repair in Symonds Yat, done in place

A typical bath repair is a few hours’ work, and the bath is back in use the following day. You won’t need a plumber or tiler, because the bath does not move. We work on acrylic, roll-top & freestanding and whirlpool & spa baths, and people most often call us about hairline or through cracks in acrylic and chips under the taps.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Location
Symonds Yat (HR9)
County
Herefordshire
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Repairing versus replacing in Symonds Yat

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. We charge the same wherever you are, so there is no premium for Symonds Yat. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Symonds Yat

  • Colour mixed on the day to match
  • Most jobs done in one visit
  • Honest advice, even when it means no job
  • Dust sheets down, tidy finish

See our prices page and resurfacing vs replacement cost guide.

The process

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area

Getting a price

Most clients in Symonds Yat get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Related advice

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

What a repair cannot fix

A few problems are outside what a surface repair can do:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Water coming from the waste or taps rather than the bath
  • Flexing caused by a failed cradle or loose feet

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic

Symonds Yat questions

When can I have a bath again?

Generally within a day, depending on the repair.

What information do you need?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send pictures.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Herefordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Get a dripping tap fixed promptly
  • Don’t leave razors or cans standing in the bath
  • Rinse the bath after use, especially in hard water areas
  • Do not leave a fresh chip for long

Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.

What we are called out for in Symonds Yat

A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.

People typically call us when they notice something like this:

  • A cracked acrylic bath
  • Chips caused by builders
  • Rust by the waste and overflow
  • A chip where the taps sit

Before booking anyone

  • How soon you can use it again
  • What the guarantee covers, and for how long
  • How to care for the finish
  • Whether a trained technician does the job

How to compare quotes

What affects the price in Symonds Yat

Prices start from £95. We do not charge extra for travel to Symonds Yat. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • Where the damage is and how we get to it
  • Whether we combine several jobs

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

You can generally get a fixed quote without us visiting. To help us price it:

  • Details of any past repairs
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.

Symonds Yat and nearby

Symonds Yat is about 4 miles north-east of Monmouth, in Herefordshire. Across the HR9 area, we carry out the work at your property. Symonds Yat is one of 255 places in Herefordshire we cover. You can also see our page for Birmingham, about 54 miles away.

Jobs in HR9 are booked in the same way as anywhere else. Streets in the area include Ashes Lane, Ferrie Lane and Wye View Lane, all of which we cover. Close by, we cover Symonds Yat West (1 mile south-west), Whitchurch (1 mile north-west), Crocker's Ash (1 mile west), Old Forge (1 mile north) and Goodrich Cross (1 mile north). Further out, we also cover Hereford (15 miles north), Ross-on-Wye (5 miles north-east), Redhill (14 miles north), Newton Farm (14 miles north), Merrivale (5 miles north-east) and Whitecross (15 miles north).

Local landmarks in Symonds Yat

We visit homes around Whitchurch CofE Primary School, Ye Olde Ferrie Inne pub and Church of St Dubricius and the streets around them. Other landmarks nearby include Kirbee Rural Crafts Museum (0.7 miles north-west) and Cottage Hospital (3.7 miles south-west). Not far away are Huntsham Hill.

Map of Symonds Yat © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.