Carmarthenshire · Wales

Bath chip & crack repair in Tairgwaith, Carmarthenshire

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Tairgwaith, with a one-year guarantee on every repair.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Tairgwaith

Bath repair at your home in Tairgwaith

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. We work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are a chip where the taps sit and rusty patches near the plughole.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Tairgwaith (SA18)
Region
Carmarthenshire
Guarantee
A year, on every repair
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

What bath repair costs

Prices start from £95. You will know the full cost before you book. We take into account:

  • The colour and finish to match
  • What kind of damage it is
  • What the surface is made of
  • How many items we do on one visit

We charge the same wherever you are, with no extra for Tairgwaith. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from photos

Most quotes are done from photos alone. To help us price it:

  • One picture of the entire bath
  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

How the visit works

We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the day after.

How to prepare

  • Keep a parking space free if you can
  • Let us know which floor the room is on
  • Make sure the room can be ventilated

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Send pictures for a quote

Advice

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Should you replace it?

Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • Same prices wherever you are
  • Nothing taken out or refitted
  • Every repair guaranteed for a year
  • Rooms protected and left tidy

Take a look at our full price list and guide to resurfacing and replacement costs.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs in Carmarthenshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

For anyone letting property in or around Tairgwaith, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.

Keeping it looking good

Once the work has cured, treat it gently:

  • Rinse it down after each bath
  • Have new chips seen to early
  • Fix dripping taps early to stop staining and limescale
  • Clean with warm water and a mild detergent

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

Where we work around Tairgwaith

Tairgwaith is about 9 miles north of Neath, in Carmarthenshire. We travel to homes and businesses in Tairgwaith and nearby villages, so nothing has to leave your home. Our repair technicians cover 195 places across Carmarthenshire.

Every address in SA18 is covered, from the main roads to the quietest streets. From Brook Terrace, Lauderdale Road and St Davids Road or anywhere nearby, we can come to you. Nearby, we also work in Gwaun-Cae-Gurwen (1 mile west), Cwmgors (1 mile south-west), Cwmllynfell (2 miles east), Ystradowen (2 miles east) and Pen-Rhiw-fawr (2 miles east). Further out, we also cover Llanelli (15 miles south-west), Llanelli Rural (15 miles south-west), Bigyn (15 miles south-west), Wern (15 miles south-west), Ammanford (6 miles west) and Box (14 miles south-west).

Landmarks near Tairgwaith

Typical jobs here are in homes near Tairgwaith Primary School, among other places. Further afield, we also cover the area around Amman Valley Hospital (2.9 miles west) and Penlle'r Castell (3.7 miles south-west). The countryside around Tairgwaith includes Gwaun-Cae-Gurwen Common and Llyn y Fignen-felen.

  • Local facilities include West Glamorgan (2.3 miles north-east)
Map of Tairgwaith © OpenStreetMap contributors

Common problems we fix in Tairgwaith

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Contact us if you’ve noticed:

  • Deep scratches in acrylic
  • Cracks in an acrylic bath
  • Chips along the edge of the bath
  • Damage beneath the taps

Comparing quotes

  • What aftercare is recommended
  • What the guarantee covers, and for how long
  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts

10 questions to ask before booking

Questions from Tairgwaith

How long before I can use the bath?

Normally by the following day, though it depends on what we’ve done.

What happens once I’ve sent photos?

We come back with a fixed price, usually with dates to choose from. You are under no obligation.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

Do you cover the whole of Carmarthenshire?

We cover the whole UK, including Tairgwaith and the rest of Carmarthenshire. Just include your postcode and we will offer you dates.

Can I add another job to the visit?

Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

What a repair cannot fix

We won’t take on work that won’t last, so here’s what a repair cannot put right:

  • Leaking fittings, which need a plumber
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Rust that has eaten right through a steel bath

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.