Norfolk · England
Bath chip & crack repair in Themelthorpe, Norfolk
Fixed-price bath repair in Themelthorpe and the surrounding area, typically in one visit and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Chips along the edge of the bath
Bath repair in Themelthorpe without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include rust spots around the plughole and an old repair that has yellowed or come loose, in cast iron enamel, whirlpool & spa baths and acrylic.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Themelthorpe (NR20)
- Region
- Norfolk
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Themelthorpe
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Norfolk.
Do you cover Themelthorpe?
Yes. We cover the entire UK and come to Themelthorpe. Send us pictures for a fixed quote, or call 0345 017 0787.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Get a dripping tap fixed promptly
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
- Don’t leave razors or cans standing in the bath
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Towns and villages near Themelthorpe
Also in Themelthorpe
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Themelthorpe and nearby
Themelthorpe is about 8 miles north-east of Dereham, in Norfolk. Jobs in Themelthorpe are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Our technicians cover all 797 towns and villages across Norfolk, from the larger towns to small villages.
We cover every part of the NR20 postcode area. We also cover the places around Themelthorpe: Foulsham (2 miles west), Guestwick Green (2 miles north), Foxley (2 miles south-west), Kerdiston (2 miles east) and Bawdeswell (2 miles south). Within a short drive, we also cover Norwich (14 miles south-east), Dereham (8 miles south-west), Wymondham (14 miles south), Sprowston (14 miles south-east), North Walsham (15 miles east) and Sheringham (13 miles north-east).
Landmarks near Themelthorpe
Locally, our jobs take us to homes close to Church of St Andrew, among other places. Further afield, we also cover the area around Morley Castle (4.2 miles south-west). Green spaces nearby include Foxley Wood.
Should you replace it?
Replacing a fitted bath normally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Fixed prices from your pictures
- One-year guarantee on every repair
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
See our pricing or bath cost comparison.
How it works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes a few hours, depending on the damage, and you can get on with other things while we’re there.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Make sure the room can be ventilated
- Let the surface dry out before the visit
- Clear the area around the damage
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we take into account:
- How many items we do on one visit
- What kind of damage it is
- Unusual colours or finishes
- How easy the damage is to reach
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
Before you send photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- Natural light rather than flash
- A picture taken from further back
- Whether it’s been repaired or coated before
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
What we can’t put right
We will always be straight with you, so here’s what a repair can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
