Hertfordshire · England
Bath Repair for Throcking homes
Problem with your bath in Throcking? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
Bath repair at your home in Throcking
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the following day. Whether it’s chips on the rim or sides and rust spots around the plughole, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Throcking (SG9)
- Region
- Hertfordshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Common questions in Throcking
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Which areas do you work in?
All of Hertfordshire, and the rest of the UK. Travel is included in the price.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Do you work in Throcking?
Yes. We cover the entire UK and come to Throcking. Send pictures and we’ll quote, or call 0345 017 0787.
Will the repair show?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Our work in Throcking
Throcking is about 6 miles north-east of Stevenage, in Hertfordshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our technicians cover 381 places in Hertfordshire, from the larger towns to small villages. Our nearest city page is London, about 31 miles away.
We work across the SG9 postcode area. Other places close to Throcking include Cottered (1 mile south-west), Chipping (1 mile north-east), Buntingford (2 miles east), Aspenden (2 miles south-east) and Layston (2 miles east). Larger places within reach include Stevenage (6 miles south-west), Bishop's Stortford (11 miles south-east), Welwyn Garden City (12 miles south-west), Hitchin (9 miles west), Hoddesdon (14 miles south) and Hatfield (15 miles south-west).
Local landmarks in Throcking
Typical jobs here are in homes near Freman College and Holy Trinity Church and the streets around them. Nearby you’ll also find Clothall Castle (4.1 miles west). Not far away are Hawkins Wood.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Why repair rather than replace?
Replacing a fitted bath normally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Throcking
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Most jobs done in one visit
- One price list for the entire UK
Read our prices page or guide to resurfacing and replacement costs.
Aftercare tips
After the repair has cured, a few habits help it last:
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
When we would advise against a repair
Before you book, it’s worth knowing the limits:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we will tell you honestly.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
When to call us in Throcking
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
The things clients usually mention when they call are:
- A chip where the taps sit
- A kit repair that didn’t last
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
Questions to ask before booking
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- Who will actually do the work
- What preparation is included
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
Ask for a price
Most clients in Throcking get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
What else we do in Throcking
About our accreditations · Every repair comes with a one-year guarantee.
