Barnsley · England
Bath Repair in Thurlstone
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Thurlstone. Free, fixed quotes from your pictures.
- Repairs from £95
- Snagging damage from a refit
- Rust spots around the plughole
Bath repair in Thurlstone, done in place
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. We work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and people most often call us about impact holes in acrylic and a failed DIY repair that’s discoloured or lifting.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Thurlstone (S36)
- Region
- Barnsley
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Signs you need bath repair in Thurlstone
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- Chips under the taps
- A cracked acrylic bath
- Chips caused by builders
- Rusty patches near the plughole
Before booking anyone
- The length of the guarantee and what it covers
- Who turns up on the day
- How your room will be protected
- Whether the colour is mixed to match
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the day after.
Preparing for the visit
- Make sure the area is dry
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
Landlords, agents and businesses in Thurlstone
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in one visit. Our bath repair starts from £95. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why Thurlstone customers choose us
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- Fixed prices from your photos
- One-year guarantee on every repair
Read our pricing and resurfacing vs replacement cost guide.
Common questions in Thurlstone
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do you come to Thurlstone?
Yes, we do. Repair technicians travel to Thurlstone from across the region, with no extra charge for travel.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
About Thurlstone
Thurlstone is about 7 miles west of Barnsley, in Barnsley. Jobs in Thurlstone are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in all 94 towns and villages in Barnsley. We work right across the region, from Thurlstone to Leeds (20 miles away).
Jobs in S36 work the same way as everywhere else we cover. Whether you live on Brookland Way, Manchester Road and Saville Lane or a nearby road, we can come to you. We also travel to Millhouse Green (1 mile west), Penistone (1 mile east), Cubley (1 mile south-east), Catshaw (1 mile west) and Cat Hill (2 miles north-east). Within a short drive, we also cover Barnsley (7 miles east), Wombwell (10 miles east), Wath upon Dearne (12 miles east), Shaw Lands (7 miles east), Hoyland (9 miles east) and Worsbrough (8 miles east).
Near you in Thurlstone
We visit homes around Church of St Saviour, The Crystal Palace pub and Penistone Grammar School, among other places. The closest station to Thurlstone is Penistone station, roughly 1.2 miles east. Other landmarks nearby include De Morgan Museum (3.9 miles north-east).
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps early to stop staining and limescale
- Cover the bath during DIY or decorating
- If an acrylic bath flexes, have its feet adjusted
- Rinse the bath after use, especially in hard water areas
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Also near Thurlstone
More services for Thurlstone
How we price bath repair
Prices start from £95. Prices are worked out job by job. What matters most is:
- The colour and finish to match
- Whether we combine several jobs
- How many areas need work
- Where the damage is and how we get to it
Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Details of any past repairs
- Something in shot to show the size
- Your postcode, so we can check dates
- A wider photo showing the whole bath
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
