Worcestershire · England
Bath Repair for Torton homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Torton. Free, fixed quotes from your photos.
- Repairs from £95
- Chips caused by builders
- Scratches you can feel with a fingernail
About our bath repair in Torton
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Typical jobs include chips under the taps and scratches you can feel with a fingernail, on whirlpool & spa baths, acrylic and roll-top & freestanding.
Whatever the size of the job, you get the same one-year guarantee in Torton and across Worcestershire.
- Location
- Torton (DY10, DY11)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to a morning or an afternoon.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Open a window if you can
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
Signs you need bath repair in Torton
A cracked acrylic bath generally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.
You may need us if you’ve spotted:
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
What to look for in a quote
- How soon you can use it again
- What aftercare is recommended
- What happens if they find more damage
- Whether cleaning and preparation are in the price
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why us?
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- CHAS and Constructionline accredited
See our prices page and guide to resurfacing and replacement costs.
Torton questions
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
What areas do you cover?
Across the UK, so Torton is covered. Prices don’t change with location.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Towns and villages near Torton
What else we do in Torton
Torton and nearby
Torton is about 2 miles east of Stourport-on-Severn, in Worcestershire. Whether you’re in the middle of Torton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Torton is one of 376 places in Worcestershire where we work. You can also see our page for Birmingham, about 16 miles away.
Our visits in DY10 and DY11 are booked in the same way as anywhere else. Whether you live on Torton Lane, Worcester Road and Droitwich Road or anywhere nearby, a technician can come to you. Close by, we cover Low Hill (1 mile north-west), Summerfield (1 mile north-west), Podmoor (1 mile east), Hartlebury (1 mile south) and Wilden (1 mile west). Further out, we also cover Worcester (11 miles south), Redditch (13 miles east), Kidderminster (3 miles north), Bromsgrove (7 miles east), Droitwich Spa (7 miles south-east) and Bewdley (4 miles north-west).
Landmarks near Torton
In Torton, that means homes near Hartlebury CofE Primary School, The Stourport High School and Sixth Form College and Church of St James. The closest station to Torton is Hartlebury station, about 1.1 miles south of the centre. Nearby you’ll also find Kidderminster Railway Museum (2.4 miles north) and Elmley Lovett (2.3 miles south-east). For a walk, there’s Axborough Hill and Wilden Marsh.
When we would advise against a repair
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Torton
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Aftercare tips
So the finish stays in good condition for years:
- Get any new chip repaired before it rusts
- Stick to mild cleaners and a soft cloth
- Check that an acrylic bath does not move when you stand in it
- Rinse it down after each bath
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
