East Riding of Yorkshire · England
Bath Repair for Uncleby homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Uncleby, with a one-year guarantee on every repair.
- Repairs from £95
- Cracks in an acrylic bath
- Rusty patches near the plughole
Bath repair in Uncleby, done in place
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with damage beneath the taps and deep scratches in acrylic, we can typically put it right, on cast iron enamel, roll-top & freestanding and acrylic alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Uncleby (YO41)
- Region
- East Riding of Yorkshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Uncleby
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Get in touch if you’ve noticed:
- Impact holes in acrylic
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
Questions to ask before you book
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
- Who turns up on the day
- Whether the price covers travel
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why choose Surface Doctor in Uncleby
- No extra charge for your area
- Colour mixed on the day to match
- Free fixed quotes from pictures
- One visit for most repairs
See our prices page and bath cost comparison.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Do not leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Ensure an acrylic bath is firm underfoot
- Protect the bath with a towel when doing jobs nearby
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Your questions about bath repair in Uncleby
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you come to Uncleby?
Yes. We work across the UK and travel to Uncleby. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a few hours, depending on the damage for most jobs. We leave the room clean.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Clear the area around the damage
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
Nearby places to Uncleby
Other services in Uncleby
How we price bath repair
Repairs from £95. There’s no charge for travel to Uncleby. The price comes down to:
- How hard the colour is to match
- How many areas need work
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- Any earlier repairs or coatings
For a price in Uncleby, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Covering Uncleby
Uncleby is about 6 miles north of Pocklington, in East Riding of Yorkshire. We visit homes and businesses in Uncleby and the surrounding area, so there’s no workshop to go to. Uncleby is one of 299 towns and villages in East Riding of Yorkshire we cover. Our jobs stretch from Uncleby to Leeds (35 miles away).
Every address in YO41 is within our area. Neighbouring places we cover include Painsthorpe (1 mile south), Bugthorpe (3 miles west), Bishop Wilton (3 miles south), Leavening (3 miles north-west) and Great Givendale (3 miles south). Within a short drive, we also cover Driffield (13 miles east), Pocklington (6 miles south), Market Weighton (12 miles south), Stamford Bridge (6 miles west), Nafferton (15 miles east) and Holme upon Spalding Moor (13 miles south).
What’s near Uncleby
Around Uncleby, we work in homes near All Saints' Church and the streets around them. Other landmarks nearby include Mount Ferrant Castle (3.1 miles north). Open spaces near Uncleby include Bishop Wilton Wold.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
