Blaenau Gwent · Wales
Bath chip & crack repair in Victoria, Blaenau Gwent
Bath repair in Victoria without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
Bath repair in Victoria without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can typically use the bath the day after. Typical jobs include holes from dropped items and an old repair that has yellowed or come loose, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Whatever the size of the job, it’s backed by a one-year guarantee in Victoria and across Blaenau Gwent.
- Where
- Victoria (NP23, NP12)
- Area hub
- Blaenau Gwent
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Do not leave razors or cans standing in the bath
- Do not scrub with anything abrasive
- Have new chips seen to early
- Get a dripping tap fixed promptly
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
What happens on the day
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Get a quote
If you are in Victoria and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Do you need bath repair in Victoria?
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Get in touch if you’ve noticed any of these:
- Snagging damage from a refit
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- Damage beneath the taps
Before you book anyone
- How long it needs to cure
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- How long the guarantee is and what it covers
Nearby places to Victoria
Also in Victoria
Covering Victoria
Victoria is about 2 miles south of Ebbw Vale, in Blaenau Gwent. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Victoria is one of 56 places in Blaenau Gwent we cover. Our nearest city page is Birmingham, about 75 miles away.
Here we cover the NP23 and NP12 postcode area. That includes homes on Cwm Road, Hafod Lane and Village Lane. Main roads around Victoria include the A4046, which makes travel easy. We also travel to Garden City (1 mile north), Troedrhiw-gwair (1 mile west), Ebbw Vale South (1 mile north), Briery Hill (2 miles north) and Hollybush (2 miles south). Further out, we also cover Tredegar (3 miles north-west), Abertillery (3 miles south-east), Badminton (3 miles north), Beaufort (3 miles north), Rassau (4 miles north) and Carmeltown (3 miles north).
Near you in Victoria
Around Victoria, we work in homes near Park Hotel, St Paul's Church and Tredegar Comprehensive School and the streets around them. Victoria’s nearest station is Ebbw Vale Parkway station, about 0.5 miles north of the centre. Nearby you will also find Festival Park (under half a mile south-east) and Bedwellty Union Workhouse (1.7 miles north-west). The countryside around Victoria includes Cefn Manmoel and Cwmcelyn Lake.
When we’d advise against a repair
It helps to know what we can’t do:
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
FAQs for Victoria
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Do you come to Victoria?
Yes. We work across the UK and come to Victoria and the rest of Blaenau Gwent. Send pictures and we will quote, or call 0345 017 0787.
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- The size and number of damaged areas
- Access to the area
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- One picture of the entire bath
- A close-up of the damage, in focus
- Something in shot to show the size
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
