Powys · Wales
Bath Repair in Walls Bridge
Fixed-price bath repair in Walls Bridge and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Deep scratches in acrylic
- Rust spots around the plughole
Bath repair in Walls Bridge without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. If you’re dealing with rust by the waste and overflow and deep scratches in acrylic, we can generally put it right.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Walls Bridge (SY22)
- County
- Powys
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Walls Bridge
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Walls Bridge
Repairs from £95. There is no charge for travel to Walls Bridge. The price depends on:
- What the surface is made of
- How many areas need work
- Doing more than one item at once
- How easy the damage is to reach
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Send photos for a quote
Two or three clear pictures are typically enough. It helps if you send:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- One picture of the whole bath
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
About Walls Bridge
Walls Bridge is about 6 miles south of Oswestry, in Powys. Wherever you are in the SY22 postcode area, a technician comes to you. Walls Bridge is one of 234 towns and villages in Powys we cover. We work right across the region, from Walls Bridge to Liverpool (about 44 miles away).
Postcode districts we cover here: SY22. From The Street, North Road and Chapel Lane or a nearby road, we can come to you. If you are just outside Walls Bridge, we cover Llanymynech (1 mile east), Pen-y-foel (1 mile north-east), Llandysilio (1 mile south-east), Pant (1 mile north-east) and Four Crosses (2 miles south-east). We also work in nearby towns such as Y Trallwng (8 miles south), Bron-y-Buckley (8 miles south), Cegidfa (6 miles south-west), Montgomery (15 miles south), Llanfair Caereinion (13 miles south-west) and Llanfyllin (7 miles west).
Local landmarks in Walls Bridge
Around Walls Bridge, we work in homes near The Dolphin pub, Carreghofa C.P. School and Church of St Agatha. Well-known places in the area include Carreghofa Castle (0.9 miles north-west). The countryside around Walls Bridge includes Llanymynech Hill.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Places near Walls Bridge
Also in Walls Bridge
Do you need bath repair in Walls Bridge?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Signs it’s time to call us include:
- Holes from dropped items
- Deep scratches in acrylic
- Rust by the waste and overflow
- A chip where the taps sit
What to look for in a quote
- When it can be used again
- How the room is protected while they work
- What happens if the damage is worse than the pictures show
- What preparation is included
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, depending on the damage.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
- Keep a parking space free if you can
How to get a price
Most customers in Walls Bridge get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
FAQs for Walls Bridge
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
How long does the repair take to cure?
Generally within a day, though it depends on what we have done.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Which areas do you work in?
Across the UK. Prices do not change with location.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Can you repair a crack in an acrylic bath?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Store metal items away from the bath
- Check that an acrylic bath doesn’t move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
