Staffordshire · England
Bath chip & crack repair in Warton, Staffordshire
We travel to Warton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Chips on the rim or sides
How we handle bath repair in Warton
Most of our bath repairs take a few hours, and you can generally bathe again the following day. You won’t need a plumber or tiler, because the bath does not move. Common call-outs are for a hole punched through by something heavy and cracks in an acrylic bath, on whirlpool & spa baths, pressed steel enamel and acrylic.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Warton (B79)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Warton and the surrounding area
Warton is about 4 miles east of Tamworth, in Staffordshire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Warton is one of 512 places in Staffordshire we cover. We work right across the region, from Warton to Birmingham (17 miles away).
We work across the B79 postcode area and the streets around it. You will find streets such as Church Road, Copeland Close and Barn End Road. Neighbouring places we cover include Orton-on-the-Hill (1 mile east), Austrey (2 miles north), Little Orton (2 miles north-east), Newton Regis (3 miles north) and Sheepy Magna (3 miles south-east). Further out, we also cover Burton upon Trent (12 miles north), Tamworth (4 miles west), Lichfield (11 miles west), Burntwood (15 miles west), Horninglow (14 miles north) and Stowe (11 miles north-west).
What’s near Warton
In Warton, that means homes near Warton Nethersole's CofE Primary School, Church of the Holy Trinity and The Polesworth School. For rail, the closest station is Polesworth station, roughly 1.2 miles west of the centre. A little further out are Ratcliffe Culey (3.7 miles south-east) and Sir Robert Peel Community Hospital (6 miles west).
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Warton clients choose us
- One price list for the entire UK
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
Take a look at our pricing or bath cost comparison.
When a repair is not the answer
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Looking after it afterwards
So the finish stays in good condition for years:
- Protect the bath with a towel when doing jobs nearby
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse it down after each bath
- Clean with warm water and a mild detergent
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Your questions about bath repair in Warton
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How long does the repair take to cure?
Generally within a day, though it depends on what we’ve done.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
How we price bath repair
Prices start from £95. We do not charge extra for travel to Warton. The price comes down to:
- The type of damage
- The colour and finish to match
- How many areas need work
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- One picture of the whole bath
- Something in shot to show the size
- One sharp close-up of the damage
- Any earlier repairs or coatings
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath repair in Warton?
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Get in touch if you’ve noticed:
- A hole punched through by something heavy
- Rust spots around the plughole
- A chipped rim or side
- Damage done while the bathroom was being fitted
Before booking anyone
- What preparation is included
- Whether the price is fixed and includes VAT
- Who will actually do the work
- How your room will be protected
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Open a window if you can
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
What else we do in Warton
About our accreditations · Every repair comes with a one-year guarantee.
