Central Bedfordshire · England
Bath Repair in Wilstead
We travel to Wilstead for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- A chipped rim or side
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Do not leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Bath repair at your home in Wilstead
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you’re dealing with a kit repair that didn’t last and chips under the taps, we can help, on roll-top & freestanding, acrylic and pressed steel enamel alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Wilstead (MK45)
- County
- Central Bedfordshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- How easy the damage is to reach
- What kind of damage it is
- The colour and finish to match
- How much damage there is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- Your postcode, so we can check dates
- The material, if you know it
- Natural light rather than flash
- A coin or ruler next to the damage for scale
For a price in Wilstead, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When to call us in Wilstead
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
Clients typically contact us about:
- Rust spots around the plughole
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
- Chips caused by builders
Before booking anyone
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- How to look after the finish
- What protection goes down before work starts
Covering Wilstead
Wilstead is about 3 miles south-east of Kempston, in Central Bedfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 121 towns and villages in Central Bedfordshire, from the larger towns to small villages. Our nearest city page is London, about 43 miles away.
Postcode districts we cover here: MK45. You’ll find streets such as Church Road, Howard Close and Maple Close, all of which we cover. Other places close to Wilstead include Wixams (1 mile north-west), Littleworth (1 mile north-east), Houghton Conquest (1 mile south-west), Haynes Church End (2 miles south-east) and Cotton End (2 miles north-east). We also work in nearby towns such as Leighton Buzzard (14 miles south-west), Dunstable (14 miles south), Biggleswade (8 miles east), Houghton Regis (12 miles south), Flitwick (5 miles south-west) and Linslade (14 miles south-west).
Local landmarks in Wilstead
Our customers here include homes close to Wixams Academy, Parish Church of All Saints and Wilstead Primary School. Wilstead’s nearest station is Kempston Hardwick station, about 2.6 miles north-west of the centre. Other landmarks nearby include Ampthill Castle (3.9 miles south-west) and Bedford Hospital (3.8 miles north). Not far away are Heydon Hill and Stewartby Lake.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Wilstead: your questions answered
What about rust by the waste?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
Repair or replace in Wilstead?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. We charge the same wherever you are, so there’s no premium for Wilstead. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- No need to remove anything
- Rooms protected and left tidy
- One visit for most repairs
- Fixed prices from your pictures
Take a look at our full price list and bath cost comparison.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Also near Wilstead
More services for Wilstead
What we cannot put right
Some jobs are not right for a repair, including:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- Wear across the entire surface, which needs re-enamelling
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Wilstead
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
