Herefordshire · England
Bath chip & crack repair in Wilton, Herefordshire
Our repair technicians come to Wilton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
When to call us in Wilton
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a picture if you notice any of these:
- Cracks in an acrylic bath
- Damage beneath the taps
- Rust spots around the plughole
- Chips on the rim or sides
Questions to ask before booking
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- How long it needs to cure
- Who will actually do the work
Bath repair at your home in Wilton
Most of our bath repairs take a few hours, and you can usually bathe again the day after. You will not need a plumber or tiler, because nothing is disconnected. If you’re dealing with damage done while the bathroom was being fitted and a cracked acrylic bath, we can usually put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Wilton (HR9)
- Area hub
- Herefordshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Wilton
Repairs from £95. Every quote is fixed and free. What we look at:
- What the surface is made of
- Doing more than one item at once
- The type of damage
- The size and number of damaged areas
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Your postcode, so we can check dates
- One picture of the whole bath
- Any details about the material
- Good light, ideally daylight, without flash glare
Upload photos of the damage and one of the entire item, and tell us you are in Wilton, and we will reply with a fixed quote.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Places near Wilton
More services for Wilton
Common questions in Wilton
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Wilton.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we’ll plan for it.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
When a repair is not the answer
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly before you book.
What we work on
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
About Wilton
Wilton is about 1 mile west of Ross-on-Wye, in Herefordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Wilton is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Wilton to Birmingham (49 miles away).
All of HR9 is covered. From The Pippins, Fisherman's Reach and Wilton Road or a nearby road, we can come to you. Neighbouring places we cover include Bridstow (1 mile west), Ross-on-Wye (1 mile east), Merrivale (1 mile south-east), Peterstow (1 mile west) and Coughton (2 miles south). Within a short drive, we also cover Hereford (11 miles north-west), Ledbury (11 miles north-east), Redhill (10 miles north-west), Newton Farm (10 miles north-west), Whitecross (11 miles north-west) and Eign Hill (10 miles north-west).
Near you in Wilton
We visit homes around John Kyrle High School and Sixth Form Centre Academy, Bridstow CofE Primary School and White Lion pub and the streets around them. Further afield, we also cover the area around Railways In Miniature Museum (0.7 miles east) and Wilton Castle (within half a mile north-east). Open spaces near Wilton include Wigpool and Chase Wood Hill.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Should you replace it?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No extra charge for your area
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- A fixed quote before you book
See our full price list and guide to resurfacing and replacement costs.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What we do, step by step
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
