West Sussex · England
Bath chip & crack repair in Woolbeding, West Sussex
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Woolbeding, with a one-year guarantee on every repair.
- Repairs from £95
- Hairline or through cracks in acrylic
- Scratches you can feel with a fingernail
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Bath repair at your home in Woolbeding
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We are frequently asked to fix a chipped rim or side and a failed DIY repair that’s discoloured or lifting, across cast iron enamel, acrylic and pressed steel enamel.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Woolbeding (GU29)
- County
- West Sussex
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
It helps to know what we can’t do too:
- Cracks in acrylic we cannot reach from underneath
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we will tell you honestly.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Keeping it looking good
So the finish stays in good condition for years:
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Repair or replace in Woolbeding?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Normally one visit, start to finish
- Colour-matched on site
- No extra charge for your area
See our prices page and bath cost comparison.
Do you need bath repair in Woolbeding?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Most people get in touch after spotting something like this:
- A hole punched through by something heavy
- Chips under the taps
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
What to look for in a quote
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- What protection goes down before work starts
- Aftercare advice
Our work in Woolbeding
Woolbeding is about 6 miles south of Haslemere, in West Sussex. From the centre of Woolbeding to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Woolbeding is one of 371 places in West Sussex where we work. We work right across the region, from Woolbeding to London (about 45 miles away).
Our repair technicians cover all of the GU29 postcode area and the streets around it. Other places close to Woolbeding include Stedham (1 mile west), Midhurst (1 mile south-east), Easebourne (1 mile east), Iping (1 mile west) and Bepton Common (1 mile south). We also work in nearby towns such as Bognor Regis (15 miles south), Chichester (11 miles south), Emsworth (13 miles south-west), Storrington (14 miles east), Billingshurst (13 miles east) and Portfield (11 miles south).
What’s near Woolbeding
Typical jobs here are in homes near Midhurst Rother College, Stedham Primary School and The Parish Church of All Hollows. Other landmarks nearby include Lodsworth Castle (3.9 miles east) and Midhurst Museum (1.2 miles south-east). For a walk, there’s Iping and Stedham Commons and Wheeler's Down.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Questions from Woolbeding
Is a cracked acrylic bath repairable?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
How long before I can use the bath?
Normally by the following day, depending on the repair.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What does bath repair cost?
Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Nearby places to Woolbeding
More services for Woolbeding
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
