Cheshire East · England
Bath Repair in Woore
Bath repair for Woore, without a refit. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- A hole punched through by something heavy
- Rusty patches near the plughole
Bath repair at your home in Woore
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. We regularly repair pressed steel enamel, whirlpool & spa baths and acrylic, and people most frequently call us about chips under the taps and rust spots around the plughole.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Woore (CW3)
- Area hub
- Cheshire East
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
A repair is not right for every job, including:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Woore
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
For landlords and businesses
If you manage property in Woore, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Woore as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Towns and villages near Woore
More services for Woore
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before you book. We take into account:
- Where the damage is and how we get to it
- How hard the colour is to match
- What the surface is made of
- The size and number of damaged areas
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- Something in shot to show the size
- A picture taken from further back
- Details of any past repairs
- What it’s made of, if you know
If you’re in Woore and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Woore questions
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is there any odour?
There may be a mild smell during the work.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can a cracked acrylic bath be fixed?
Generally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
How long before I can use the bath?
Most baths can be used the following day. We confirm the time before we leave.
Covering Woore
Woore is about 6 miles north-east of Market Drayton, in Cheshire East. Jobs in Woore are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover all 254 towns and villages in Cheshire East, from the larger towns to small villages. You can also see our page for Manchester, about 35 miles away.
Every address in CW3 is within our area. Streets in the area include The Square, London Road and St Leonard's Way, and we cover them all. Neighbouring places we cover include Knighton (1 mile south), Bearstone (2 miles south), Napley (3 miles south), Buerton (3 miles west) and Norton in Hales (3 miles south-west). Further out, we also cover Crewe (8 miles north), Congleton (15 miles north-east), Nantwich (8 miles north-west), Middlewich (15 miles north), Sandbach (12 miles north) and Coppenhall (9 miles north).
Landmarks near Woore
Typical jobs here are in homes near Church of Saint Leonard and Woore Primary and Nursery School, among other places. Other landmarks nearby include Heighley Castle (3.7 miles north-east) and Checkley cum Wrinehill (2.7 miles north). The countryside around Woore includes Black Firs and Cranberry Bog.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Woore
- Fixed prices from your pictures
- Typically one visit, start to finish
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
Read our full price list or resurfacing vs replacement cost guide.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a morning or an afternoon from start to finish. Before we go, we will explain when it can be used and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Related advice
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
- Rinse it down after each bath
- Check that an acrylic bath doesn’t move when you stand in it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
