Northamptonshire · England
Bath chip & crack repair in Wymington, Northamptonshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Wymington, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Cracks in an acrylic bath
How we price bath repair
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Natural light rather than flash
- Details of any past repairs
- One picture of the entire bath
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Bath repair in Wymington without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Whether it’s damage beneath the taps and a kit repair that didn’t last, we can usually put it right, whatever the material.
Every job is backed for twelve months in Wymington and everywhere else. We return to put right any problem with the work.
- Location
- Wymington (NN10)
- Area hub
- Northamptonshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Most damage we see is avoidable. A few tips:
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath doesn’t move when you stand in it
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
When a repair isn’t the answer
We would rather lose a job than do one that won’t last, so these are the limits:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
FAQs for Wymington
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Also near Wymington
Other services in Wymington
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
How the visit works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Clear the area around the damage
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
Do you need bath repair in Wymington?
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we’re asked about most:
- Snagging damage from a refit
- Scratches you can feel with a fingernail
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
Questions to ask before you book
- What prep work is covered
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What aftercare is recommended
Landlord and trade work in Wymington
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Wymington, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
About Wymington
Wymington is about 1 mile south of Rushden, in Northamptonshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Our technicians cover all 364 towns and villages across Northamptonshire, from the larger towns to small villages. Our jobs stretch from Wymington to Birmingham (about 56 miles away).
Jobs in NN10 are booked in the same way as anywhere else. Streets in the area include Church Lane, St Lawrence Walk and Rushden Road. If you’re just outside Wymington, we cover Little Wymington (1 mile north), Podington (1 mile south-west), Farndish (2 miles west), Irchester (2 miles north-west) and Wollaston (3 miles west). Further out, we also cover Northampton (12 miles west), Kettering (10 miles north-west), Wellingborough (5 miles north-west), Desborough (15 miles north-west), Raunds (6 miles north-east) and Moulton (10 miles west).
Around Wymington
In Wymington, that means homes near Church of St Lawrence, The Ferrers School and Jubilee Park. The closest station to Wymington is Wellingborough station, about 4 miles north-west. Well-known places in the area include Rushden Lakes (2.4 miles north-west) and Podington Castle (1.2 miles south-west). Not far away are Wymington Meadow.
About our accreditations · Every repair comes with a one-year guarantee.
