Hampshire · England

Bath chip & crack repair in Yateley, Hampshire

Bath repair in and around Yateley: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips caused by builders
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Yateley

Aftercare tips

So the finish stays in good condition:

  • Make sure an acrylic bath is firm underfoot
  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale
  • Keep metal cans and razors off the surface

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.

Bath repair in Yateley without replacing anything

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s rusty patches near the plughole and impact holes in acrylic, we can typically put it right.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Yateley (GU46)
Area hub
Hampshire
Warranty
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

What a repair cannot fix

A repair isn’t right for every job, for example:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Flexing caused by a failed cradle or loose feet
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

The process

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, including clearing up.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, typically by the next day, the bath is ready to use.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Plan for the room to be out of bounds to pets and children
  • Let us know about parking or access

Ask for a price

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a free quote

Advice

Where we work around Yateley

Yateley is about 4 miles north-west of Farnborough, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 683 places in Hampshire, from the larger towns to small villages. Our jobs stretch from Yateley to London (34 miles away).

Jobs in GU46 are booked in the same way as anywhere else. Whether you live on Hall Lane, Calcott Park and Wistaria Lane or a nearby road, we can come to you. Being close to the B3272, Yateley is easy for our repair technicians to reach. Nearby, we also work in Darby Green (1 mile east), Eversley Cross (1 mile north-west), Little Sandhurst (1 mile north-east), Minley (2 miles south) and Eversley Centre (2 miles west). Further out, we also cover Basingstoke (13 miles south-west), Farnborough (4 miles south-east), Fleet (4 miles south), Aldershot (7 miles south-east), Alton (14 miles south-west) and Tadley (13 miles west).

What’s near Yateley

Typical jobs here are in homes near Yateley School, Cranford Park Primary and Church of St Peter, among other places. You’ll also find Ambarrow Court (1.4 miles north-east) and Dog & Partridge pub (less than half a mile north-east). The nearest railway station is Sandhurst station, roughly 1.3 miles north-east. Further afield, we also cover the area around Staff College Museum (3.6 miles east) and Pinewood Hospital (3.6 miles north-east). Green spaces nearby include Horseshoe Lake and Hitches Hill.

Map of Yateley © OpenStreetMap contributors

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Repair technicians who travel to you, UK-wide
  • Straight answers about what a repair can do
  • Typically one visit, start to finish

See our full price list or bath cost comparison.

What affects the price in Yateley

Prices start from £95. Every quote is fixed and free. What we take into account:

  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • The material and finish
  • What kind of damage it is

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • Something in shot to show the size
  • One picture of the whole bath
  • What it’s made of, if you know
  • One sharp close-up of the damage

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

Your questions about bath repair in Yateley

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

I tried a repair kit. Can you fix it?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

Is a bath repair durable?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.

Is there a call-out fee?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Can rust on a bath be repaired?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Can you repair several things at once?

Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.

Signs you need bath repair in Yateley

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

Contact us if you’ve noticed any of these:

  • A chip where the taps sit
  • A kit repair that didn’t last
  • Rusty patches near the plughole
  • Cracks in an acrylic bath

What to look for in a quote

  • What aftercare is recommended
  • How long the guarantee is and what it covers
  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.