Rhondda Cynon Taff · Wales

Bath Resealing for Aberaman South homes

Local bath resealing for Aberaman South: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Sealant that is split or lifting
  • Missing sealant behind the taps
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Aberaman South

Bath resealing at your home in Aberaman South

Resealing is quick, but it transforms the look. Clean, white joints make a bathroom look cared for, and they keep water out. Typical jobs include a messy previous reseal and stained silicone, across shower trays & enclosures, wet rooms and basins & vanity units.

You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Location
Aberaman South (CF44)
County
Rhondda Cynon Taff
Cover
One year on every repair
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, for the same reason.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Landlords, agents and businesses in Aberaman South

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

When to call us in Aberaman South

Poor ventilation speeds things up: damp hangs around, and mould grows faster.

People typically call us when they notice one of these:

  • Black spots in the silicone
  • Damp near the bath
  • Unsealed corners
  • An untidy old seal

What your quote should include

  • How changes to the job are handled
  • Whether cleaning and preparation are in the price
  • How soon you can use it again
  • How to look after the finish

How to compare quotes

How the visit works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes about two hours for a bath. We tidy up before we leave and tell you when it’s ready to use.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Getting ready for the visit

  • Open a window if you can
  • Keep pets and children out of the room while we work
  • Have somewhere for us to park nearby if possible

Get a quote

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send pictures for a quote

Read more

How we price bath resealing

We price every job individually. The main factors are:

  • The colour and finish to match
  • How many items we do on one visit
  • The size and number of damaged areas
  • The material and finish

Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

You can take the pictures on your phone. Make sure they show:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • The postcode, so we can plan the visit
  • One sharp close-up of the damage

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job the same day in most cases.

Aberaman South and nearby

Aberaman South is about 2 miles west of Mountain Ash, in Rhondda Cynon Taff. Across the CF44 area, a technician comes to you. Our technicians cover 133 places in Rhondda Cynon Taff.

Our visits in CF44 work the same way as everywhere else we cover. Jobs here include addresses on Farm Road, Jubilee Road and Cwmaman Road and the roads around them. Neighbouring places we cover include Abercwmboi (1 mile north-east), Fernhill (1 mile north-east), Godreaman (1 mile north-west), Cwmaman (1 mile west) and Aberaman North (1 mile north-west). Further out, we also cover Pontypridd (7 miles south-east), Tonypandy (5 miles south), Rhondda (4 miles south-west), Porth (5 miles south), Church Village (9 miles south-east) and Tonyrefail (7 miles south).

Near you in Aberaman South

In Aberaman South, that means homes near Bethesda Baptist Chapel, Cap Coch Hotel and Blaengwawr Comprehensive School. Aberaman South’s nearest station is Cwmbach station, roughly 1.1 miles north. Nearby you will also find Ysbyty Cwm Cynon (1.3 miles east) and Cynon Valley Museum (2.3 miles north-west). The countryside around Aberaman South includes Coed Cae Aberaman and Pwll Waun Cynon.

  • Local facilities include Mountain Ash (1.9 miles east)
Map of Aberaman South © OpenStreetMap contributors

Aberaman South questions

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

How long does resealing take?

Around two hours for a bath, then it needs to cure.

Why does mould come back so fast?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders in Aberaman South.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

What happens after I send photos?

We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

How to look after the repair

Much of the damage we repair could have been avoided. A few tips:

  • Reseal when black spots will not clean off
  • Clean the joints with a mild cleaner
  • Don’t stand toiletries on the seal
  • Run the extractor fan during and after showers

Avoid scraping the joints, and keep shampoo bottles off the joints.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • Hidden water damage
  • Gaps too big for silicone alone
  • Loose tiles, which need refixing first

Send us photos and we will tell you honestly before you book.

What we work on

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Wet rooms
  • Shower trays & enclosures
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.