Oxfordshire · England

Bath Resealing in Alkerton

Local bath resealing for Alkerton: photo quotes, tidy work and a year’s guarantee.

  • Damp near the bath
  • Black spots in the silicone
  • Gaps by the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Alkerton?

When to call us in Alkerton

Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.

Keep an eye out for these signs:

  • Leaks at the edges
  • Stained silicone
  • Black spots in the silicone
  • Gaps in the seal

Before you book anyone

  • How soon you can use it again
  • Is the price fixed, and does it include VAT?
  • Whether a trained technician does the job
  • How long the guarantee is and what it covers

Choosing a repair company

About our bath resealing in Alkerton

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours, plus curing time. Typical jobs include leaks at the edges and gaps by the taps, across baths, basins & vanity units and shower trays & enclosures.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.

Where
Alkerton (OX15)
County
Oxfordshire
Cover
A year, on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Prices and what affects them

There’s no area surcharge for Alkerton. The price reflects:

  • How much damage there is
  • The type of damage
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Quotes from your photos

Good pictures mean an accurate price. Here’s what helps:

  • Your postcode, so we can check dates
  • The material, if you know it
  • Natural light rather than flash
  • Any earlier repairs or coatings

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Wipe the joints dry after use
  • Reseal at the first sign of lifting
  • Open a window after bathing
  • Clean the joints with a mild cleaner

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.

Common questions in Alkerton

How much does bath resealing cost in Alkerton?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

My seal keeps tearing. Why?

Usually because the bath or tray moves. We fill the bath before sealing it.

Do you charge for travel?

There is no separate call-out charge. Your fixed price includes everything.

Is the work guaranteed?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

How long does silicone take to cure?

Normally about a day later. We will tell you the exact time.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

Can you reseal over the old silicone?

Never over old. It’s removed, cleaned off and the joint dried first.

How do I stop mould in sealant?

Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

About Alkerton

Alkerton is about 5 miles west of Banbury, in Oxfordshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Alkerton is one of 443 towns and villages in Oxfordshire we cover. Our jobs stretch from Alkerton to Birmingham (33 miles away).

We cover every part of OX15 and the streets around it. If you’re just outside Alkerton, we cover Shenington (1 mile west), Balscote (1 mile south-east), Shutford (2 miles south), Epwell (2 miles south-west) and Swalcliffe (3 miles south). Within a short drive, we also cover Banbury (5 miles east), Chipping Norton (11 miles south-west), Neithrop (4 miles east), Grimsbury (6 miles east), Ruscote (4 miles east) and Bloxham (5 miles south-east).

Around Alkerton

Typical jobs here are in homes near Shenington Church of England Primary School, Church of St Michael and The Bell Inn. Other landmarks nearby include Hanwell Castle (3.7 miles east) and W. O. Bentley Memorial Foundation (1.8 miles east). Green spaces nearby include Edge Hill and Woodford Bottom and Lamb's Pool.

Map of Alkerton © OpenStreetMap contributors

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

Baths are resealed with water in them, so the joint is at its widest.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Hidden water damage
  • Gaps too big for silicone alone
  • A bath or tray that moves, until its support is fixed

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures

How the visit works

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a couple of hours, and we finish by cleaning up and talking you through the result.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. We make sure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Before we arrive

  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings
  • Mention if the room is upstairs or in a flat

Get a quote

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Advice

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

For anyone letting property in or around Alkerton, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.

Is resealing worth it?

Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why Alkerton customers choose us

  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • We come to you, anywhere in the UK
  • One-year guarantee on every repair

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.