Somerset · England

Bath Resealing in Andersea

Bath, shower and sink resealing with new mould-resistant silicone at your home in Andersea, with a one-year guarantee on every repair.

  • Stained silicone
  • Black spots in the silicone
  • Gaps by the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Andersea

Different materials, different repairs

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Bath resealing in Andersea without replacing anything

Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. If you are dealing with old sealant that looks dirty and silicone smeared on tiles, we can normally put it right, whatever the material.

The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.

Roll-top bath being refinished by a Surface Doctor technician
Where
Andersea (TA7)
Region
Somerset
Warranty
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What we cannot put right

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • A flexing bath
  • Hidden water damage
  • Gaps so wide they need filling or trims before sealing

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Andersea

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms
  • Baths

Prices and what affects them

Each job gets its own fixed quote. This is what makes a difference:

  • Doing more than one item at once
  • How much damage there is
  • Unusual colours or finishes
  • The material

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Getting a price from photos

When you take your photos, a few simple things make all the difference:

  • A wider photo showing the entire bath or shower
  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You will get a fixed price, not an estimate.

Landlord and trade work in Andersea

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Keeping it looking good

Aftercare is simple:

  • Reseal when black spots will not clean off
  • Wipe the joints dry after use
  • Clean the sealant gently and regularly
  • Store bottles on a shelf

Avoid scraping the joints, and do not stand bottles on the seal.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Questions from Andersea

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

How do I get a price for bath resealing in Andersea?

Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Are there extra charges for Andersea?

We don’t add a call-out fee. Your fixed price includes everything.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Why does my sealant keep splitting?

Something is moving. Persistent splitting can mean the support needs attention.

How long does a reseal take?

Most reseals take about two hours. Leave it to cure before use.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

DIY kit or professional repair?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which typically takes around two hours. If we find something your photos didn’t show, we will explain it before carrying on.

  1. All the old sealant is cut out and removed.
  2. The joint is cleaned and any mould treated.
  3. We dry the joint thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Before we arrive

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Let us know about parking or access

Get a quote

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Send photos for a quote

Read more

Andersea and the surrounding area

Andersea is about 3 miles south-east of Bridgwater, in Somerset. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in 640 places across Somerset.

Postcode districts we cover here: TA7. Other places close to Andersea include West Yeo (1 mile south), Burrowbridge (2 miles south-east), St Michael Church (3 miles south-west), East Lyng (3 miles south) and Athelney (3 miles south-east). Further out, we also cover Taunton (8 miles south-west), Bridgwater (3 miles north-west), Chard (15 miles south), Burnham-on-Sea (10 miles north), Wells (15 miles north-east) and Wellington (14 miles south-west).

Landmarks near Andersea

Our customers here include homes close to Church of St Peter and St John and Thatchers Arms, among other places. For rail, the closest station is Bridgwater station, about 2.7 miles north-west. Other landmarks nearby include Somerset Brick and Tile Museum (2.8 miles north-west) and Bridgwater Castle (3.1 miles north-west). Open spaces near Andersea include Burrow Mump.

Map of Andersea © OpenStreetMap contributors

Signs you need bath resealing in Andersea

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.

You may need us if you’ve spotted any of these:

  • Gaps by the taps
  • Stained silicone
  • Black spots in the silicone
  • Sealant that is split or lifting

What your quote should include

  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.