Aberdeen · Scotland
Bath & shower resealing (mastic) in Balmedie, Aberdeen
We travel to Balmedie for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Black spots in the silicone
- Gaps by the taps
- A messy previous reseal
Why reseal now?
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- Same prices wherever you are
- A year’s guarantee on all work
Take a look at our full price list.
Bath resealing in Balmedie without replacing anything
We reseal baths with them filled with water, so the joint opens fully, so the seal does not tear when the bath is first used. We regularly repair wet rooms, basins & vanity units and shower trays & enclosures, and people most frequently call us about discoloured, yellow sealant and mould you can’t clean out.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Balmedie (AB23)
- Area hub
- Aberdeen
- Cover
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Balmedie
Also in Balmedie
Common questions in Balmedie
What areas do you cover?
The whole UK, including all of Aberdeen. Send your postcode with your pictures and we’ll offer you dates.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
My seal keeps tearing. Why?
Movement is the usual cause. We fill the bath before sealing it.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
When can I use the bath after resealing?
Normally about a day later. We will tell you the exact time.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Landlords, agents and businesses in Balmedie
Landlords, letting agents and housing providers in Balmedie use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Balmedie, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Common problems we fix in Balmedie
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
People generally call us when they notice something like this:
- Gaps in the seal
- Old sealant that looks dirty
- Leaks at the edges
- Mould you can’t clean out
Comparing quotes
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- The length of the guarantee and what it covers
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Where we work around Balmedie
Balmedie is about 7 miles north of Aberdeen, in Aberdeen. Clients in Balmedie get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 63 towns and villages across Aberdeen.
We work across AB23 and the streets around it. Jobs here include addresses on Robbie Close, Keith Avenue and Beachfield Way. We also travel to Belhelvie (1 mile west), Hill of Keir (1 mile north-west), Potterton (2 miles south-west), Blackdog (2 miles south) and Whitecairns (3 miles west). We also work in nearby towns such as Aberdeen (7 miles south), Rosemount (7 miles south), Berryden (7 miles south), Ferryhill (8 miles south), New Aberdeen (7 miles south) and Dyce (6 miles south-west).
What’s near Balmedie
Around Balmedie, we work in homes near Belhelvie North Church and the streets around them. Further afield, we also cover the area around Foveran Castle (4.5 miles north) and Kingseat Hospital (3.9 miles west). Not far away are Perwinnes Hill and Corby Loch.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Let steam out after showers
- Keep the joints dry
- Clean the joints with a mild cleaner
- Do not stand toiletries on the seal
Leave the sealant to cure for the time we give you, normally about a day.
Black mould in sealant is not just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.
How the visit works
We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take about two hours for a bath, and the room is left clean and tidy.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Advice
How we price bath resealing
Quotes are free and the price is fixed. What we look at:
- The colour and finish to match
- The material and finish
- The type of damage
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- A photo taken from further back
- Whether it’s been repaired or coated before
- Something in shot to show the size
To get a price, send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
