Highland · Scotland

Bath & shower resealing (mastic) in Blackpark, Highland

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Blackpark and across Highland. Send pictures for a free, fixed quote.

  • Leaks at the edges
  • Old sealant that looks dirty
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Blackpark?

Covering Blackpark

Blackpark is in Highland. Jobs in Blackpark are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Blackpark is one of 253 places in Highland where we work.

Postcode districts we cover here: IV49. We regularly work on streets such as Lime Park, Cul a' Chuirn and Sraid Nicconnich and the roads around them. Neighbouring places we cover include An t-Àth Leathann (1 mile north-west), Harrapul (1 mile east), Corry (1 mile north-west), Kyleakin (7 miles east) and Kyle of Lochalsh (8 miles north-east). For island and remote addresses, call first so we can plan the visit.

Local landmarks in Blackpark

Typical jobs here are in homes near Skye and the streets around them. Well-known places in the area include Mackinnon Memorial Hospital (0.8 miles north-west). Green spaces nearby include Loch an Droma Bhàin and Bheinn Shuardail.

Map of Blackpark © OpenStreetMap contributors

How we handle bath resealing in Blackpark

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. If you are dealing with black mould in the sealant and damp near the bath, we can help, on wet rooms, baths and kitchen worktops & sinks alike.

Big or small, it’s backed by a one-year guarantee in Blackpark and across Highland.

Where
Blackpark (IV49)
County
Highland
Warranty
12 months on all our work
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

Is resealing worth it?

Putting new silicone over old does not last. It soon peels, and traps mould underneath. We remove the old sealant completely. Our prices are the same across the UK, so there’s no premium for Blackpark. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • We leave the room as we found it
  • One visit for most repairs
  • Nothing taken out or refitted
  • Repair technicians who travel to you, UK-wide

See our full price list.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Use the extractor fan
  • Wipe the joints dry after use
  • Clean the sealant gently and regularly
  • Air the room after use

Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.

Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

What affects the price in Blackpark

We price every job individually. The main factors are:

  • The type of damage
  • Access to the area
  • How many items we do on one visit
  • How much damage there is

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Quotes from your pictures

When you take your pictures, a few simple things make all the difference:

  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area

To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Common problems we fix in Blackpark

Sealant does not last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

Most people get in touch after spotting one of these:

  • Mould you can’t clean out
  • Gaps in the seal
  • Damp near the bath
  • An untidy old seal

Comparing quotes

  • What preparation is included
  • Who will actually do the work
  • Is the price fixed, and does it include VAT?
  • Whether they match the colour on site

10 questions to ask before booking

When we’d advise against a repair

Before you book, it’s worth knowing the limits too:

  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage
  • A flexing bath

Send us pictures and we’ll tell you honestly.

Materials we work on in Blackpark

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units
  • Baths

How the visit works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a couple of hours. We clean up when we’re done and tell you when it’s ready to use.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Preparing for the visit

  • Make sure the area is dry
  • Keep pets and children out of the room while we work
  • Clear toiletries, mats and anything else from around the area

How to get a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.

Get a fixed quote

Related advice

Blackpark: your questions answered

My seal keeps tearing. Why?

Normally because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

What does bath resealing cost?

We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

How long does a reseal take?

Generally a couple of hours, then it needs to cure.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Do you cover Blackpark?

Yes. We cover the entire UK and come to Blackpark and the rest of Highland. Send us pictures for a fixed quote, or call 0345 017 0787.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.