Norfolk · England
Bath Resealing for Brancaster Staithe homes
Bath resealing in Brancaster Staithe without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Gaps by the taps
- Sealant that is split or lifting
- Discoloured, yellow sealant
About our bath resealing in Brancaster Staithe
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We regularly repair kitchen worktops & sinks, shower trays & enclosures and baths, and people most often call us about gaps in the seal and water getting behind the bath or tray.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Where
- Brancaster Staithe (PE31)
- County
- Norfolk
- Warranty
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices are worked out job by job, from your photos. What matters most is:
- How hard the colour is to match
- Access to the area
- Previous DIY repairs that have to come out
- What kind of damage it is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Quotes from your photos
You can typically get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath or shower
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.
How to look after the repair
To keep it looking its best:
- Open a window after bathing
- Replace the seal when mould sets in
- Clean the joints with a mild cleaner
- Ventilate the bathroom well
Let it cure fully before using the bath or shower, typically around 24 hours.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
What we are called out for in Brancaster Staithe
Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.
Keep an eye out for these signs:
- An untidy old seal
- Unsealed corners
- Old sealant that looks dirty
- Gaps in the seal
Comparing quotes
- A fixed quote, and whether VAT is included
- What happens if they find more damage
- Whether a trained technician does the job
- Whether the colour is mixed to match
Where we work around Brancaster Staithe
Brancaster Staithe is about 18 miles north-east of King's Lynn, in Norfolk. From the centre of Brancaster Staithe to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 797 towns and villages in Norfolk.
Our technicians cover all of the PE31 postcode area. From Dale End, Delgate Lane and The Drove or anywhere nearby, a technician can come to you. Nearby, we also work in Burnham Deepdale (1 mile east), Brancaster (2 miles west), Burnham Norton (2 miles east), Burnham Market (2 miles south-east) and Titchwell (2 miles west). Larger places within reach include Fakenham (12 miles south-east), Hunstanton (8 miles west), Heacham (9 miles south-west), Wells-next-the-Sea (7 miles east), Dersingham (11 miles south-west) and Snettisham (10 miles south-west).
Around Brancaster Staithe
Locally, our jobs take us to homes close to Jolly Sailors pub and St Mary's Church, among other places. Nearby you’ll also find Dalegate Market (less than half a mile east). The countryside around Brancaster Staithe includes Titchwell Marsh.
When we would advise against a repair
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A flexing bath
- Hidden water damage
- Gaps too big for silicone alone
If in doubt, send photos and we’ll say what we think.
Materials we work on in Brancaster Staithe
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
Also near Brancaster Staithe
What else we do in Brancaster Staithe
Why reseal now?
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
Why book with us
- No need to remove anything
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- We come to you, anywhere in the UK
Take a look at our full price list.
Your questions about bath resealing in Brancaster Staithe
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
When can I use the bath after resealing?
Normally after around 24 hours. We confirm before we leave.
What areas do you cover?
We work UK-wide, and that includes Brancaster Staithe. Our prices are the same everywhere.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
How long does a reseal take?
Around two hours for a bath, plus curing time.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Why does the silicone keep cracking?
Movement is the usual cause. We fill the bath before sealing it.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What we do, step by step
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a couple of hours from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Different materials, different repairs
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, for the same reason.
About our accreditations · Every repair comes with a one-year guarantee.
