Warwickshire · England
Bath Resealing for Castle Vale homes
Bath resealing for Castle Vale, without a refit. Send us photos for a fixed price, then book a visit.
- Discoloured, yellow sealant
- Silicone coming away from the tiles
- Mould you can’t clean out
Castle Vale and nearby
Castle Vale is about 3 miles south-east of Royal Sutton Coldfield, in Warwickshire. Anywhere in B35, we come to you. Castle Vale is one of 324 towns and villages in Warwickshire where we work. Our jobs stretch from Castle Vale to Birmingham (about 6 miles away).
Our repair technicians cover all of the B35, B76 and B24 postcode area. Whether you live on Bore Road, Park Lane and Manby Road or anywhere nearby, a technician can come to you. Main roads around Castle Vale include the A38, which makes travel easy. Other places close to Castle Vale include Castle Bromwich (1 mile south), Wiggins Hill (2 miles north-east), Water Orton (2 miles east), Smith's Wood (2 miles south-east) and Curdworth (2 miles north-east). Within a short drive, we also cover Nuneaton (13 miles east), Bedworth (13 miles east), Kenilworth (15 miles south-east), Fordbridge (3 miles south-east), Atherstone (11 miles east) and Chilvers Coton (13 miles east).
What’s near Castle Vale
Locally, our jobs take us to homes close to Greenwood Academy, Plantsbrook Local Nature Reserve and Park Hall Academy and the streets around them. Nearby too are St Cuthbert of Lindisfarne (under half a mile south), Bagot Arms (0.9 miles west) and Pegasus Primary School (less than half a mile east). The nearest railway station is Water Orton station, about 1.7 miles east. Further afield, we also cover the area around Castle Vale Shopping Centre (0.6 miles south-west) and Good Hope Hospital (3.4 miles north). Not far away are Shard End Lake and Park Hall Nature Reserve.
- Local facilities include Sutton New Hall (1.1 miles north)
About our bath resealing in Castle Vale
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. Our repair technicians work on wet rooms, baths and basins & vanity units, and the jobs we see most are black spots in the silicone and a messy previous reseal.
Big or small, it’s backed by a one-year guarantee.
- Where
- Castle Vale (B35, B76, B24)
- Area hub
- Warwickshire
- Warranty
- A year, on every repair
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Castle Vale
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Why does my sealant keep going mouldy?
Generally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can you reseal over the old silicone?
All the old sealant comes out. Fresh silicone doesn’t stick to old.
Why it’s worth resealing in Castle Vale
Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why choose Surface Doctor in Castle Vale
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
Read our full price list.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- Water damage behind the bath that needs a builder
- Loose tiles, which need refixing first
- A bath or tray that moves, until its support is fixed
If in doubt, send photos and we’ll say what we think.
What we work on
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Do you need bath resealing in Castle Vale?
Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.
Look out for any of the following:
- Gaps by the taps
- Sealant that is split or lifting
- Stained silicone
- Leaks at the edges
Questions to ask before you book
- What preparation is included
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
Places near Castle Vale
Other services in Castle Vale
Landlord and trade work in Castle Vale
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How it works
We agree an arrival time beforehand. On site, it takes around two hours in most cases. The room is left tidy and ready to use once it has cured.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Materials and what they mean for the repair
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Prices and what affects them
We price every job individually. What matters most is:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- What kind of damage it is
- The material
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- One picture of the entire bath or shower
- Any earlier repairs or coatings
- One sharp close-up of the damage
- The postcode, so we can plan the visit
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
