Shropshire · England

Bath & shower resealing (mastic) in Coundarbour, Shropshire

Fixed-price bath resealing in Coundarbour and the surrounding area, generally in one visit and guaranteed for a year.

  • Mould you cannot clean out
  • An untidy old seal
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Coundarbour?

Aftercare tips

Simple care helps the repair last. Our advice:

  • Keep bottles off the joints
  • Reseal at the first sign of lifting
  • Clean the sealant gently and regularly
  • Wipe the joints dry after use

Let it cure fully before using the bath or shower, typically around 24 hours.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

How we handle bath resealing in Coundarbour

Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. Typical jobs include discoloured, yellow sealant and an untidy old seal, on kitchen worktops & sinks, baths and wet rooms.

You get a one-year guarantee, the same in Coundarbour as everywhere else we work.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Coundarbour (SY5)
County
Shropshire
Warranty
12 months on all our work
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Questions from Coundarbour

How soon can you come?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Is repairing better than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Why does my sealant keep splitting?

Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How much does bath resealing cost in Coundarbour?

Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your SY5 postcode.

How long before I can shower?

Generally after around 24 hours. We’ll tell you the exact time.

Prices and what affects them

There are no hourly rates or hidden extras. The price depends on:

  • How easy the damage is to reach
  • Previous DIY repairs that have to come out
  • The type of damage
  • What the surface is made of

Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

How to get a fixed quote

When you take your photos, a few simple things make all the difference:

  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size
  • A wider photo showing the entire bath or shower
  • Good light, ideally daylight, without flash glare

Upload pictures of the damage and one of the whole item, and tell us you are in Coundarbour, and we’ll come back with a fixed quote.

Signs you need bath resealing in Coundarbour

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.

Customers generally contact us about:

  • Missing sealant behind the taps
  • Discoloured, yellow sealant
  • Silicone smeared on tiles
  • Black spots in the silicone

Before you book anyone

  • How soon you can use it again
  • How your room will be protected
  • Whether there are any call-out or travel charges
  • Aftercare advice

10 questions to ask before booking

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

When we’d advise against a repair

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Movement in the bath or tray
  • Gaps so wide they need filling or trims before sealing
  • Loose tiles, which need refixing first

Not sure? Send photos and we will give you a straight answer before you book.

Surfaces we repair

  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms

Is resealing worth it?

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor in Coundarbour

  • Honest advice, even when it means no job
  • We leave the room as we found it
  • Fixed prices from your pictures
  • A year’s guarantee on all work

See our prices page.

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes about two hours for a bath, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Open a window if you can
  • Let us know if it has been repaired before

How to get a price

For a price in Coundarbour, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

Covering Coundarbour

Coundarbour is about 6 miles south-east of Shrewsbury, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Coundarbour is one of 433 places in Shropshire where we work. We work right across the region, from Coundarbour to Birmingham (34 miles away).

Our technicians cover all of the SY5 postcode area and the streets around it. Neighbouring places we cover include Cross Houses (2 miles north-west), Cressage (2 miles south-east), Eaton Constantine (3 miles east), Atcham (3 miles north-west) and Acton Burnell (3 miles south-west). Larger places within reach include Shrewsbury (6 miles north-west), Madeley (8 miles east), Bridgnorth (12 miles south-east), Coleham (6 miles north-west), Kingsland (6 miles north-west) and Belle Vue (6 miles north-west).

Landmarks near Coundarbour

Typical jobs here are in homes near St Peter's Church. Further afield, we also cover the area around Wroxeter Roman Site And Museum (2 miles north) and Acton Burnell Castle (2.7 miles south-west). Not far away are Bomere Pool.

Map of Coundarbour © OpenStreetMap contributors

For landlords and businesses

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.