Shropshire · England
Bath & shower resealing (mastic) in Craven Arms, Shropshire
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Craven Arms. Free, fixed quotes from your pictures.
- Silicone coming away from the tiles
- A messy previous reseal
- Stained silicone

Our work in Craven Arms
Craven Arms is about 19 miles west of Bridgnorth, in Shropshire. Wherever you are in the SY7 postcode area, we carry out the work at your property. Our repair technicians cover 433 places across Shropshire, from the larger towns to small villages. You can also see our page for Birmingham, about 40 miles away.
Our visits in SY7 and SY6 work the same way as everywhere else we cover. From Market Street, Ash Close and Whitemeadow Close or anywhere nearby, a technician can come to you. Main roads around Craven Arms include the A49 and B4368, which makes travel easy. Close by, we cover Halford (1 mile north-east), The Grove (1 mile north), Long Meadowend (1 mile west), Wistanstow (2 miles north) and Leamoor Common (2 miles north). Larger places within reach include Ludlow (7 miles south-east), Church Stretton (7 miles north), Bishop's Castle (8 miles north-west), Pontesbury (14 miles north), Clun (8 miles west) and Minsterley (14 miles north).
Landmarks near Craven Arms
Our clients here include homes close to Stokesay Primary School, Stokesay Inn and Church of St Thomas, among other places. Craven Arms has its own railway station: Craven Arms station. Well-known places in the area include Stokesay Castle (0.8 miles south) and Land of Lost Content (less than half a mile south-east). Green spaces nearby include Callow Hill.
About our bath resealing in Craven Arms
We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours, then it needs to cure. Whether it’s black mould in the sealant and unsealed corners, we can help, on kitchen worktops & sinks, wet rooms and baths alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.

- Area
- Craven Arms (SY7, SY6)
- County
- Shropshire
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Craven Arms
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath resealing
A fixed quote means you know the cost before you book. We take into account:
- What the surface is made of
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Craven Arms. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- What it’s made of, if you know
- A wider photo showing the whole bath or shower
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job.
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes around two hours, and we finish by cleaning up and talking you through the result.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Open a window if you can
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Signs you need bath resealing in Craven Arms
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
Most people contact us after spotting something like this:
- A messy previous reseal
- Leaks at the edges
- Sealant that is split or lifting
- Unsealed corners
What your quote should include
- Is the price fixed, and does it include VAT?
- How to look after the finish
- What happens if the damage is worse than the photos show
- How your room will be protected
Why reseal now?
Putting new silicone over old doesn’t last. It soon peels, and traps mould underneath. A proper reseal removes the old first. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why Craven Arms customers choose us
- No need to remove anything
- Normally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
Take a look at our prices page.
How to look after the repair
So the finish stays in good condition:
- Run the extractor fan during and after showers
- Reseal when black spots won’t clean off
- Store bottles on a shelf
- Keep the joints dry
Avoid scraping the joints, and don’t stand bottles on the seal.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Tiles that move, until they’re refixed
- Movement in the bath or tray
- Gaps so wide they need filling or trims before sealing
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
Towns and villages near Craven Arms
Also in Craven Arms
Craven Arms questions
Are there extra charges for Craven Arms?
Travel is included in the price, with the same prices everywhere we work.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Craven Arms.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
How do I stop mould in sealant?
Damp is the cause. Ventilation and drying keep it clean longer.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.
About our accreditations · Every repair comes with a one-year guarantee.

